PureT - GAC10W - 10" x 2.5" Granular Activated Carbon - GAC Water Filter
Technical Details
| Model Number | GAC10W |
| Dimensions | 10" x 2.5" |
| Filter Media | Granular Activated Carbon (GAC) |
| Primary Function | Chlorine, taste, and odor reduction |
| Housing Compatibility | Standard 10-inch filter housings |
| Service Life | 6 months (depending on water quality) |
| Application | Whole-house, RO pre-filtration |
| Replaces | WaterPur CCI10CLW12, CCI-10-CLW12 |
Filter Replacement Process
- Turn off water supply and relieve system pressure by opening a downstream faucet or pressing the red pressure release button on the housing.
- Use a filter wrench to unscrew the housing sump, then remove and discard the old filter cartridge.
- Clean the housing sump with mild soap and water, inspect the o-ring for wear, and lubricate with food-grade silicone if needed.
- Insert the new PureT GAC10W cartridge into the housing, hand-tighten the sump back onto the cap, and restore water supply slowly to check for leaks.
- Flush the new carbon filter for 3-5 minutes to remove any residual carbon fines before returning the system to normal use.
Universal Fit for Standard Housings
The PureT GAC10W is engineered as a drop-in replacement for any standard 10-inch filter housing with a 2.5-inch outer diameter cartridge capacity. It directly replaces WaterPur CCI10CLW12 and CCI-10-CLW12 filters, as well as comparable GAC cartridges from major brands. Suitable for whole-house filtration systems, reverse osmosis pre-filtration stages, and point-of-use applications where chlorine and organic contaminant reduction is required.
Technical Details
| Model Number | GAC10W |
| Dimensions | 10" x 2.5" |
| Filter Media | Granular Activated Carbon (GAC) |
| Primary Function | Chlorine, taste, and odor reduction |
| Housing Compatibility | Standard 10-inch filter housings |
| Service Life | 6 months (depending on water quality) |
| Application | Whole-house, RO pre-filtration |
| Replaces | WaterPur CCI10CLW12, CCI-10-CLW12 |
Filter Replacement Process
- Turn off water supply and relieve system pressure by opening a downstream faucet or pressing the red pressure release button on the housing.
- Use a filter wrench to unscrew the housing sump, then remove and discard the old filter cartridge.
- Clean the housing sump with mild soap and water, inspect the o-ring for wear, and lubricate with food-grade silicone if needed.
- Insert the new PureT GAC10W cartridge into the housing, hand-tighten the sump back onto the cap, and restore water supply slowly to check for leaks.
- Flush the new carbon filter for 3-5 minutes to remove any residual carbon fines before returning the system to normal use.
Universal Fit for Standard Housings
The PureT GAC10W is engineered as a drop-in replacement for any standard 10-inch filter housing with a 2.5-inch outer diameter cartridge capacity. It directly replaces WaterPur CCI10CLW12 and CCI-10-CLW12 filters, as well as comparable GAC cartridges from major brands. Suitable for whole-house filtration systems, reverse osmosis pre-filtration stages, and point-of-use applications where chlorine and organic contaminant reduction is required.
Original: $8.50
-65%$8.50
$2.97Description
Technical Details
| Model Number | GAC10W |
| Dimensions | 10" x 2.5" |
| Filter Media | Granular Activated Carbon (GAC) |
| Primary Function | Chlorine, taste, and odor reduction |
| Housing Compatibility | Standard 10-inch filter housings |
| Service Life | 6 months (depending on water quality) |
| Application | Whole-house, RO pre-filtration |
| Replaces | WaterPur CCI10CLW12, CCI-10-CLW12 |
Filter Replacement Process
- Turn off water supply and relieve system pressure by opening a downstream faucet or pressing the red pressure release button on the housing.
- Use a filter wrench to unscrew the housing sump, then remove and discard the old filter cartridge.
- Clean the housing sump with mild soap and water, inspect the o-ring for wear, and lubricate with food-grade silicone if needed.
- Insert the new PureT GAC10W cartridge into the housing, hand-tighten the sump back onto the cap, and restore water supply slowly to check for leaks.
- Flush the new carbon filter for 3-5 minutes to remove any residual carbon fines before returning the system to normal use.
Universal Fit for Standard Housings
The PureT GAC10W is engineered as a drop-in replacement for any standard 10-inch filter housing with a 2.5-inch outer diameter cartridge capacity. It directly replaces WaterPur CCI10CLW12 and CCI-10-CLW12 filters, as well as comparable GAC cartridges from major brands. Suitable for whole-house filtration systems, reverse osmosis pre-filtration stages, and point-of-use applications where chlorine and organic contaminant reduction is required.
