PureT - IL-6W-C - 6" x 2" Inline Post GAC Carbon Filter
PureT IL-6W-C Technical Details
| Model Number | IL-6W-C (compatible with IL-6W-C-14, IL-6W-C-EZ, IL-6W-C-38, S7206W) |
| Dimensions | 6 inches x 2 inches (inline cartridge) |
| Filter Media | Granular Activated Carbon (GAC), coconut shell base |
| Micron Rating | 10 micron nominal |
| Filter Capacity | 700 gallons or 12 months (whichever comes first) |
| Operating Temperature | 40°F to 125°F |
| Removes | Chlorine, bad taste and odor, turbidity, THMs, dirt, sediment |
| Weight | 8 oz |
How to Install the IL-6W-C Inline Filter
- Shut off water supply and relieve system pressure before removing the old filter cartridge.
- Install the PureT IL-6W-C inline filter in the water line using appropriate NPT fittings. Verify the flow direction arrow on the filter housing matches your water flow path.
- Hand-tighten connections securely, then slowly turn water supply back on and check all connections for leaks.
- Flush the new carbon filter by running water for 3-5 minutes to remove carbon fines and activate the media.
- Replace the filter after 700 gallons or 12 months of use to maintain optimal taste and contaminant removal.
Where the IL-6W-C Works Best
The PureT IL-6W-C is most commonly used as the final polishing stage in reverse osmosis systems, installed after the RO membrane and storage tank to remove any residual tastes or odors. It also works as a standalone filter for ice makers, refrigerators, drinking fountains, and water coolers where improved taste and chlorine removal are needed. This filter is compatible with standard inline housings and can replace models IL-6W-C-14, IL-6W-C-EZ, IL-6W-C-38, IL-6W-C-EZ38, S7206W, and S7206W JG. Note that NPT fittings measure larger than their nominal size—1/4" NPT actually measures approximately 0.540" in diameter on a ruler.
PureT IL-6W-C Technical Details
| Model Number | IL-6W-C (compatible with IL-6W-C-14, IL-6W-C-EZ, IL-6W-C-38, S7206W) |
| Dimensions | 6 inches x 2 inches (inline cartridge) |
| Filter Media | Granular Activated Carbon (GAC), coconut shell base |
| Micron Rating | 10 micron nominal |
| Filter Capacity | 700 gallons or 12 months (whichever comes first) |
| Operating Temperature | 40°F to 125°F |
| Removes | Chlorine, bad taste and odor, turbidity, THMs, dirt, sediment |
| Weight | 8 oz |
How to Install the IL-6W-C Inline Filter
- Shut off water supply and relieve system pressure before removing the old filter cartridge.
- Install the PureT IL-6W-C inline filter in the water line using appropriate NPT fittings. Verify the flow direction arrow on the filter housing matches your water flow path.
- Hand-tighten connections securely, then slowly turn water supply back on and check all connections for leaks.
- Flush the new carbon filter by running water for 3-5 minutes to remove carbon fines and activate the media.
- Replace the filter after 700 gallons or 12 months of use to maintain optimal taste and contaminant removal.
Where the IL-6W-C Works Best
The PureT IL-6W-C is most commonly used as the final polishing stage in reverse osmosis systems, installed after the RO membrane and storage tank to remove any residual tastes or odors. It also works as a standalone filter for ice makers, refrigerators, drinking fountains, and water coolers where improved taste and chlorine removal are needed. This filter is compatible with standard inline housings and can replace models IL-6W-C-14, IL-6W-C-EZ, IL-6W-C-38, IL-6W-C-EZ38, S7206W, and S7206W JG. Note that NPT fittings measure larger than their nominal size—1/4" NPT actually measures approximately 0.540" in diameter on a ruler.
Original: $6.49
-65%$6.49
$2.27Description
PureT IL-6W-C Technical Details
| Model Number | IL-6W-C (compatible with IL-6W-C-14, IL-6W-C-EZ, IL-6W-C-38, S7206W) |
| Dimensions | 6 inches x 2 inches (inline cartridge) |
| Filter Media | Granular Activated Carbon (GAC), coconut shell base |
| Micron Rating | 10 micron nominal |
| Filter Capacity | 700 gallons or 12 months (whichever comes first) |
| Operating Temperature | 40°F to 125°F |
| Removes | Chlorine, bad taste and odor, turbidity, THMs, dirt, sediment |
| Weight | 8 oz |
How to Install the IL-6W-C Inline Filter
- Shut off water supply and relieve system pressure before removing the old filter cartridge.
- Install the PureT IL-6W-C inline filter in the water line using appropriate NPT fittings. Verify the flow direction arrow on the filter housing matches your water flow path.
- Hand-tighten connections securely, then slowly turn water supply back on and check all connections for leaks.
- Flush the new carbon filter by running water for 3-5 minutes to remove carbon fines and activate the media.
- Replace the filter after 700 gallons or 12 months of use to maintain optimal taste and contaminant removal.
Where the IL-6W-C Works Best
The PureT IL-6W-C is most commonly used as the final polishing stage in reverse osmosis systems, installed after the RO membrane and storage tank to remove any residual tastes or odors. It also works as a standalone filter for ice makers, refrigerators, drinking fountains, and water coolers where improved taste and chlorine removal are needed. This filter is compatible with standard inline housings and can replace models IL-6W-C-14, IL-6W-C-EZ, IL-6W-C-38, IL-6W-C-EZ38, S7206W, and S7206W JG. Note that NPT fittings measure larger than their nominal size—1/4" NPT actually measures approximately 0.540" in diameter on a ruler.
