HomeStore

PureT - SCPT Series - 10" x 4.5" Pleated Polyester Sediment Filter

Product image 1

PureT - SCPT Series - 10" x 4.5" Pleated Polyester Sediment Filter

PureT SCPT Series

10" x 4.5" Pleated Polyester Sediment Filter

Washable, reusable pleated filter built for high-flow whole house, commercial, and well water applications. Available in 1, 5, 10, 20, 30, and 50 micron ratings.

Reusable High Flow Multiple Microns
WHY IT WORKS

Engineered for Performance and Longevity

🔄

Cleanable and Reusable

Pure polyester fabric construction with no binders or additives means you can wash and reuse this filter multiple times without degradation.

📐

Large Surface Area

Pleated design maximizes filtration area in a 10" x 4.5" cartridge, increasing dirt-holding capacity and extending time between cleanings.

💧

High Flow, Low Drop

Engineered for excellent flow rates with minimal pressure drop, even in demanding whole house and commercial installations.

🎯

No Surface Blinding

Polyester fabric resists surface blinding that reduces flow over time, maintaining consistent performance throughout the filter's life.

⚙️

Versatile Micron Range

Available in 1, 5, 10, 20, 30, and 50 micron ratings to match your specific sediment filtration needs from fine silt to coarse debris.

COMPATIBILITY

Standard 10" x 4.5" Housings

The PureT SCPT series fits any standard 10-inch filter housing designed for 4.5-inch diameter cartridges. Ideal for whole house systems, commercial pre-filtration, well water sediment removal, and high-capacity applications requiring frequent cleaning cycles.

MAINTENANCE

Cleaning and Replacement Schedule

Every 1–3 months

Inspect and Clean

Remove cartridge and rinse thoroughly with water to remove accumulated sediment. Use a soft brush if needed. Cleaning frequency depends on sediment load.

After 3–5 cleanings

Deep Clean

Soak in warm water with mild detergent or white vinegar for 30 minutes, rinse thoroughly, and reinstall. Extends filter life significantly.

12–24 months

Replace Cartridge

Even with proper cleaning, polyester fabric will eventually show wear or reduced flow. Replace when cleaning no longer restores performance.

💰

Lower Cost Per Gallon

Reusable design dramatically reduces long-term filtration costs compared to disposable cartridges.

🌍

Less Waste

One washable filter replaces dozens of disposable cartridges over its lifetime.

🏭

Commercial Grade

Built to handle high sediment loads in demanding whole house, well, and commercial applications.

🔧

Easy Maintenance

Simple rinse-and-reuse design means no special tools or complicated cleaning procedures.

PureT SCPT Series

10" x 4.5" Pleated Polyester Sediment Filter

Washable, reusable pleated filter built for high-flow whole house, commercial, and well water applications. Available in 1, 5, 10, 20, 30, and 50 micron ratings.

Reusable High Flow Multiple Microns
WHY IT WORKS

Engineered for Performance and Longevity

🔄

Cleanable and Reusable

Pure polyester fabric construction with no binders or additives means you can wash and reuse this filter multiple times without degradation.

📐

Large Surface Area

Pleated design maximizes filtration area in a 10" x 4.5" cartridge, increasing dirt-holding capacity and extending time between cleanings.

💧

High Flow, Low Drop

Engineered for excellent flow rates with minimal pressure drop, even in demanding whole house and commercial installations.

🎯

No Surface Blinding

Polyester fabric resists surface blinding that reduces flow over time, maintaining consistent performance throughout the filter's life.

⚙️

Versatile Micron Range

Available in 1, 5, 10, 20, 30, and 50 micron ratings to match your specific sediment filtration needs from fine silt to coarse debris.

COMPATIBILITY

Standard 10" x 4.5" Housings

The PureT SCPT series fits any standard 10-inch filter housing designed for 4.5-inch diameter cartridges. Ideal for whole house systems, commercial pre-filtration, well water sediment removal, and high-capacity applications requiring frequent cleaning cycles.

MAINTENANCE

Cleaning and Replacement Schedule

Every 1–3 months

Inspect and Clean

Remove cartridge and rinse thoroughly with water to remove accumulated sediment. Use a soft brush if needed. Cleaning frequency depends on sediment load.

After 3–5 cleanings

Deep Clean

Soak in warm water with mild detergent or white vinegar for 30 minutes, rinse thoroughly, and reinstall. Extends filter life significantly.

12–24 months

Replace Cartridge

Even with proper cleaning, polyester fabric will eventually show wear or reduced flow. Replace when cleaning no longer restores performance.

💰

Lower Cost Per Gallon

Reusable design dramatically reduces long-term filtration costs compared to disposable cartridges.

🌍

Less Waste

One washable filter replaces dozens of disposable cartridges over its lifetime.

🏭

Commercial Grade

Built to handle high sediment loads in demanding whole house, well, and commercial applications.

🔧

Easy Maintenance

Simple rinse-and-reuse design means no special tools or complicated cleaning procedures.

Select Micron
From $3.73

Original: $10.66

-65%
PureT - SCPT Series - 10" x 4.5" Pleated Polyester Sediment Filter

$10.66

$3.73

Description

PureT SCPT Series

10" x 4.5" Pleated Polyester Sediment Filter

Washable, reusable pleated filter built for high-flow whole house, commercial, and well water applications. Available in 1, 5, 10, 20, 30, and 50 micron ratings.

Reusable High Flow Multiple Microns
WHY IT WORKS

Engineered for Performance and Longevity

🔄

Cleanable and Reusable

Pure polyester fabric construction with no binders or additives means you can wash and reuse this filter multiple times without degradation.

📐

Large Surface Area

Pleated design maximizes filtration area in a 10" x 4.5" cartridge, increasing dirt-holding capacity and extending time between cleanings.

💧

High Flow, Low Drop

Engineered for excellent flow rates with minimal pressure drop, even in demanding whole house and commercial installations.

🎯

No Surface Blinding

Polyester fabric resists surface blinding that reduces flow over time, maintaining consistent performance throughout the filter's life.

⚙️

Versatile Micron Range

Available in 1, 5, 10, 20, 30, and 50 micron ratings to match your specific sediment filtration needs from fine silt to coarse debris.

COMPATIBILITY

Standard 10" x 4.5" Housings

The PureT SCPT series fits any standard 10-inch filter housing designed for 4.5-inch diameter cartridges. Ideal for whole house systems, commercial pre-filtration, well water sediment removal, and high-capacity applications requiring frequent cleaning cycles.

MAINTENANCE

Cleaning and Replacement Schedule

Every 1–3 months

Inspect and Clean

Remove cartridge and rinse thoroughly with water to remove accumulated sediment. Use a soft brush if needed. Cleaning frequency depends on sediment load.

After 3–5 cleanings

Deep Clean

Soak in warm water with mild detergent or white vinegar for 30 minutes, rinse thoroughly, and reinstall. Extends filter life significantly.

12–24 months

Replace Cartridge

Even with proper cleaning, polyester fabric will eventually show wear or reduced flow. Replace when cleaning no longer restores performance.

💰

Lower Cost Per Gallon

Reusable design dramatically reduces long-term filtration costs compared to disposable cartridges.

🌍

Less Waste

One washable filter replaces dozens of disposable cartridges over its lifetime.

🏭

Commercial Grade

Built to handle high sediment loads in demanding whole house, well, and commercial applications.

🔧

Easy Maintenance

Simple rinse-and-reuse design means no special tools or complicated cleaning procedures.

PureT - SCPT Series - 10" x 4.5" Pleated Polyester Sediment Filter | Isopure Water