ScaleStop (NSS-948RM) Replacement Anti-Scale Media for 9x48 Tank ; 4 Liters
The ScaleStop NSS-948RM replacement media uses template-assisted crystallization to neutralize calcium and magnesium before they form hard scale deposits in your plumbing and appliances. This 4-liter refill pack restores full performance to 9x48 anti-scale conditioning tanks, extending the life of water heaters, fixtures, and coffee equipment without adding sodium or requiring drain lines.
SPECIFICATIONS
ScaleStop NSS-948RM Media Details
| Model Number | NSS-948RM |
| Media Volume | 4 Liters |
| Tank Compatibility | 9x48 inch conditioning tanks |
| Technology | Template-Assisted Crystallization (TAC) |
| Treatment Method | Scale prevention (non-softening) |
| Replacement Interval | 3-5 years (varies by water hardness) |
| Compatible Systems | Pelican PSE1800, ScaleStop 9x48 conditioners |
| Chemical-Free | No salt, no regeneration required |
INSTALLATION & USE
Replacing Your Anti-Scale Media
- Turn off water supply and relieve system pressure. Disconnect inlet and outlet lines from the 9x48 tank and remove the control head or top distributor assembly.
- Remove the existing media using a wet-dry vacuum or by carefully inverting the tank over a bucket. Rinse the tank interior and inspect the bottom distributor screen for damage or blockage.
- Pour the 4 liters of ScaleStop NSS-948RM media into the clean tank, ensuring it settles evenly around the center riser tube. Reassemble the control head and reconnect water lines.
- Slowly turn on the water supply and run a backwash cycle if your system has that capability. Check all connections for leaks and allow water to flow through the system for several minutes before returning to service.
COMPATIBILITY
System Compatibility
The ScaleStop NSS-948RM media is engineered specifically for 9x48 inch anti-scale conditioning tanks and is confirmed compatible with the Pelican PSE1800 whole-house system. This TAC media works in any salt-free conditioner designed for 4-liter media capacity and 9-inch diameter tanks. Verify your existing tank dimensions before ordering, as media volume must match tank size for proper contact time and scale prevention performance.
🔧 Pro Tip: Mark your calendar when you install new media. While TAC media can last 3-5 years, water hardness above 15 grains per gallon accelerates exhaustion. If you notice scale returning on faucets or in kettles before the expected replacement interval, test your media early rather than waiting for complete failure.
The ScaleStop NSS-948RM replacement media uses template-assisted crystallization to neutralize calcium and magnesium before they form hard scale deposits in your plumbing and appliances. This 4-liter refill pack restores full performance to 9x48 anti-scale conditioning tanks, extending the life of water heaters, fixtures, and coffee equipment without adding sodium or requiring drain lines.
SPECIFICATIONS
ScaleStop NSS-948RM Media Details
| Model Number | NSS-948RM |
| Media Volume | 4 Liters |
| Tank Compatibility | 9x48 inch conditioning tanks |
| Technology | Template-Assisted Crystallization (TAC) |
| Treatment Method | Scale prevention (non-softening) |
| Replacement Interval | 3-5 years (varies by water hardness) |
| Compatible Systems | Pelican PSE1800, ScaleStop 9x48 conditioners |
| Chemical-Free | No salt, no regeneration required |
INSTALLATION & USE
Replacing Your Anti-Scale Media
- Turn off water supply and relieve system pressure. Disconnect inlet and outlet lines from the 9x48 tank and remove the control head or top distributor assembly.
- Remove the existing media using a wet-dry vacuum or by carefully inverting the tank over a bucket. Rinse the tank interior and inspect the bottom distributor screen for damage or blockage.
- Pour the 4 liters of ScaleStop NSS-948RM media into the clean tank, ensuring it settles evenly around the center riser tube. Reassemble the control head and reconnect water lines.
- Slowly turn on the water supply and run a backwash cycle if your system has that capability. Check all connections for leaks and allow water to flow through the system for several minutes before returning to service.
COMPATIBILITY
System Compatibility
The ScaleStop NSS-948RM media is engineered specifically for 9x48 inch anti-scale conditioning tanks and is confirmed compatible with the Pelican PSE1800 whole-house system. This TAC media works in any salt-free conditioner designed for 4-liter media capacity and 9-inch diameter tanks. Verify your existing tank dimensions before ordering, as media volume must match tank size for proper contact time and scale prevention performance.
🔧 Pro Tip: Mark your calendar when you install new media. While TAC media can last 3-5 years, water hardness above 15 grains per gallon accelerates exhaustion. If you notice scale returning on faucets or in kettles before the expected replacement interval, test your media early rather than waiting for complete failure.
$224.50
Original: $641.43
-65%ScaleStop (NSS-948RM) Replacement Anti-Scale Media for 9x48 Tank ; 4 Liters—
$641.43
$224.50Description
The ScaleStop NSS-948RM replacement media uses template-assisted crystallization to neutralize calcium and magnesium before they form hard scale deposits in your plumbing and appliances. This 4-liter refill pack restores full performance to 9x48 anti-scale conditioning tanks, extending the life of water heaters, fixtures, and coffee equipment without adding sodium or requiring drain lines.
SPECIFICATIONS
ScaleStop NSS-948RM Media Details
| Model Number | NSS-948RM |
| Media Volume | 4 Liters |
| Tank Compatibility | 9x48 inch conditioning tanks |
| Technology | Template-Assisted Crystallization (TAC) |
| Treatment Method | Scale prevention (non-softening) |
| Replacement Interval | 3-5 years (varies by water hardness) |
| Compatible Systems | Pelican PSE1800, ScaleStop 9x48 conditioners |
| Chemical-Free | No salt, no regeneration required |
INSTALLATION & USE
Replacing Your Anti-Scale Media
- Turn off water supply and relieve system pressure. Disconnect inlet and outlet lines from the 9x48 tank and remove the control head or top distributor assembly.
- Remove the existing media using a wet-dry vacuum or by carefully inverting the tank over a bucket. Rinse the tank interior and inspect the bottom distributor screen for damage or blockage.
- Pour the 4 liters of ScaleStop NSS-948RM media into the clean tank, ensuring it settles evenly around the center riser tube. Reassemble the control head and reconnect water lines.
- Slowly turn on the water supply and run a backwash cycle if your system has that capability. Check all connections for leaks and allow water to flow through the system for several minutes before returning to service.
COMPATIBILITY
System Compatibility
The ScaleStop NSS-948RM media is engineered specifically for 9x48 inch anti-scale conditioning tanks and is confirmed compatible with the Pelican PSE1800 whole-house system. This TAC media works in any salt-free conditioner designed for 4-liter media capacity and 9-inch diameter tanks. Verify your existing tank dimensions before ordering, as media volume must match tank size for proper contact time and scale prevention performance.
🔧 Pro Tip: Mark your calendar when you install new media. While TAC media can last 3-5 years, water hardness above 15 grains per gallon accelerates exhaustion. If you notice scale returning on faucets or in kettles before the expected replacement interval, test your media early rather than waiting for complete failure.
