Watts-FH8000BL34 Flowmatic Black Filter Housing Heavy Duty 20" With 3/4" Ports
Technical Details
| Manufacturer | Watts |
| Model Number | FH8000BL34 |
| Housing Size | 20 inches (for 2.5" x 20" cartridges) |
| Port Size | 3/4" NPT inlet and outlet |
| Maximum Pressure | 100 psi |
| Temperature Range | 40°F to 100°F (4°C to 37.8°C) |
| Construction | FDA-grade polypropylene with reinforced ribs |
| O-Ring Material | Compressible EPDM (cap, sump, and top seat) |
Setup & Operation
- Mount the housing securely to a wall or frame using appropriate brackets, ensuring the sump has clearance below for cartridge changes.
- Apply thread sealant tape to 3/4" NPT connections and install inlet and outlet plumbing. Verify proper flow direction if using directional filter cartridges.
- Insert your 2.5" x 20" filter cartridge into the housing, then hand-tighten the sump onto the cap with the buttress threads until snug and properly seated.
- Open water supply slowly and inspect all connections for leaks. Flush the new cartridge for 2-3 minutes before putting into service.
- Replace filter cartridges according to manufacturer recommendations or when flow rate decreases noticeably. Always depressurize before opening the housing.
Cartridge & Application Fit
This Watts Flowmatic housing accepts any standard 2.5" diameter x 20" length filter cartridge, including sediment, carbon block, pleated polyester, and specialty media cartridges from Watts, Pentek, Hydronix, and other major brands. The heavy-duty polypropylene construction and EPDM seals make it suitable for commercial water filtration, chemical processing, food service, industrial pre-filtration, and applications involving aggressive chemicals like acids, ammonia, oils, and plating solutions. Not recommended for pressure relief applications or temperatures exceeding 100°F.
Technical Details
| Manufacturer | Watts |
| Model Number | FH8000BL34 |
| Housing Size | 20 inches (for 2.5" x 20" cartridges) |
| Port Size | 3/4" NPT inlet and outlet |
| Maximum Pressure | 100 psi |
| Temperature Range | 40°F to 100°F (4°C to 37.8°C) |
| Construction | FDA-grade polypropylene with reinforced ribs |
| O-Ring Material | Compressible EPDM (cap, sump, and top seat) |
Setup & Operation
- Mount the housing securely to a wall or frame using appropriate brackets, ensuring the sump has clearance below for cartridge changes.
- Apply thread sealant tape to 3/4" NPT connections and install inlet and outlet plumbing. Verify proper flow direction if using directional filter cartridges.
- Insert your 2.5" x 20" filter cartridge into the housing, then hand-tighten the sump onto the cap with the buttress threads until snug and properly seated.
- Open water supply slowly and inspect all connections for leaks. Flush the new cartridge for 2-3 minutes before putting into service.
- Replace filter cartridges according to manufacturer recommendations or when flow rate decreases noticeably. Always depressurize before opening the housing.
Cartridge & Application Fit
This Watts Flowmatic housing accepts any standard 2.5" diameter x 20" length filter cartridge, including sediment, carbon block, pleated polyester, and specialty media cartridges from Watts, Pentek, Hydronix, and other major brands. The heavy-duty polypropylene construction and EPDM seals make it suitable for commercial water filtration, chemical processing, food service, industrial pre-filtration, and applications involving aggressive chemicals like acids, ammonia, oils, and plating solutions. Not recommended for pressure relief applications or temperatures exceeding 100°F.
Description
Technical Details
| Manufacturer | Watts |
| Model Number | FH8000BL34 |
| Housing Size | 20 inches (for 2.5" x 20" cartridges) |
| Port Size | 3/4" NPT inlet and outlet |
| Maximum Pressure | 100 psi |
| Temperature Range | 40°F to 100°F (4°C to 37.8°C) |
| Construction | FDA-grade polypropylene with reinforced ribs |
| O-Ring Material | Compressible EPDM (cap, sump, and top seat) |
Setup & Operation
- Mount the housing securely to a wall or frame using appropriate brackets, ensuring the sump has clearance below for cartridge changes.
- Apply thread sealant tape to 3/4" NPT connections and install inlet and outlet plumbing. Verify proper flow direction if using directional filter cartridges.
- Insert your 2.5" x 20" filter cartridge into the housing, then hand-tighten the sump onto the cap with the buttress threads until snug and properly seated.
- Open water supply slowly and inspect all connections for leaks. Flush the new cartridge for 2-3 minutes before putting into service.
- Replace filter cartridges according to manufacturer recommendations or when flow rate decreases noticeably. Always depressurize before opening the housing.
Cartridge & Application Fit
This Watts Flowmatic housing accepts any standard 2.5" diameter x 20" length filter cartridge, including sediment, carbon block, pleated polyester, and specialty media cartridges from Watts, Pentek, Hydronix, and other major brands. The heavy-duty polypropylene construction and EPDM seals make it suitable for commercial water filtration, chemical processing, food service, industrial pre-filtration, and applications involving aggressive chemicals like acids, ammonia, oils, and plating solutions. Not recommended for pressure relief applications or temperatures exceeding 100°F.
