HomeStore

Watts (WQC4RO11-50MTNF) 4 Stage KWIK CHANGE RO System 50 GPD w- Metal Tank

Product image 1
1 / 2

Watts (WQC4RO11-50MTNF) 4 Stage KWIK CHANGE RO System 50 GPD w- Metal Tank

The Watts WQC4RO11-50MTNF delivers 50 gallons per day of purified water through a four-stage reverse osmosis system with tool-free cartridge changes. The KWIK CHANGE design eliminates traditional filter sumps, making maintenance faster and cleaner than conventional RO systems.
SPECIFICATIONS

Watts WQC4RO11-50MTNF Technical Details

Model Number WQC4RO11-50MTNF
Production Rate 50 GPD
Filtration Stages 4-Stage System
Storage Tank 3.2 Gallon Metal Tank
Maximum TDS 2,000 PPM
Operating Pressure 100 PSI Maximum
Certification WQA Gold Seal, NSF/ANSI 58
Connection Type Quick Connect Fittings
FILTRATION PROCESS

Four-Stage Purification

SEDIMENT
Pre-filter captures sand, silt, and rust particles to protect downstream filters
CARBON
Pre-filter reduces chlorine, taste, and odor compounds from municipal water
MEMBRANE
RO membrane removes up to 99% of TDS, lead, and dissolved contaminants
POLISH
Carbon post-filter refines taste and removes any residual odors before dispensing
INSTALLATION & USE

Setup and Maintenance

  1. Mount the manifold assembly under the sink and position the metal storage tank in an accessible location with the quick connect fittings facing the manifold.
  2. Connect the feed water line to the inlet using the included quick connect fittings, then attach the drain line and storage tank connections to the appropriate ports.
  3. Install all four KWIK CHANGE cartridges by aligning and twisting a quarter turn clockwise until they lock into place with the double o-ring seals.
  4. Open the feed water valve slowly and check all connections for leaks while the system pressurizes and begins filling the storage tank.
  5. Replace cartridges by turning a quarter turn counterclockwise to remove, then installing new filters with a quarter turn clockwise—no tools or sump wrenches required.
COMPATIBILITY

System Requirements

The Watts WQC4RO11-50MTNF is designed for residential point-of-use installation on municipal or well water supplies with TDS levels up to 2,000 PPM. The system requires inlet water pressure between 40 and 100 PSI for optimal performance. All KWIK CHANGE cartridges are proprietary to Watts systems and use quarter-turn installation without traditional filter sumps. The included metal storage tank provides more durability than standard composite tanks and works with any standard RO faucet with 1/4-inch tubing connections. This system is suitable for households with moderate water usage, producing approximately 50 gallons per day under standard conditions.

🔧 Pro Tip: The built-in check valves in each cartridge head prevent backflow automatically, but always close the feed water valve before removing cartridges to avoid spillage. Mark your calendar for filter changes when you install—sediment and carbon pre-filters typically need replacement every 6-12 months, while the RO membrane can last 2-3 years depending on water quality.
The Watts WQC4RO11-50MTNF delivers 50 gallons per day of purified water through a four-stage reverse osmosis system with tool-free cartridge changes. The KWIK CHANGE design eliminates traditional filter sumps, making maintenance faster and cleaner than conventional RO systems.
SPECIFICATIONS

Watts WQC4RO11-50MTNF Technical Details

Model Number WQC4RO11-50MTNF
Production Rate 50 GPD
Filtration Stages 4-Stage System
Storage Tank 3.2 Gallon Metal Tank
Maximum TDS 2,000 PPM
Operating Pressure 100 PSI Maximum
Certification WQA Gold Seal, NSF/ANSI 58
Connection Type Quick Connect Fittings
FILTRATION PROCESS

Four-Stage Purification

SEDIMENT
Pre-filter captures sand, silt, and rust particles to protect downstream filters
CARBON
Pre-filter reduces chlorine, taste, and odor compounds from municipal water
MEMBRANE
RO membrane removes up to 99% of TDS, lead, and dissolved contaminants
POLISH
Carbon post-filter refines taste and removes any residual odors before dispensing
INSTALLATION & USE

Setup and Maintenance

  1. Mount the manifold assembly under the sink and position the metal storage tank in an accessible location with the quick connect fittings facing the manifold.
  2. Connect the feed water line to the inlet using the included quick connect fittings, then attach the drain line and storage tank connections to the appropriate ports.
  3. Install all four KWIK CHANGE cartridges by aligning and twisting a quarter turn clockwise until they lock into place with the double o-ring seals.
  4. Open the feed water valve slowly and check all connections for leaks while the system pressurizes and begins filling the storage tank.
  5. Replace cartridges by turning a quarter turn counterclockwise to remove, then installing new filters with a quarter turn clockwise—no tools or sump wrenches required.
COMPATIBILITY

System Requirements

The Watts WQC4RO11-50MTNF is designed for residential point-of-use installation on municipal or well water supplies with TDS levels up to 2,000 PPM. The system requires inlet water pressure between 40 and 100 PSI for optimal performance. All KWIK CHANGE cartridges are proprietary to Watts systems and use quarter-turn installation without traditional filter sumps. The included metal storage tank provides more durability than standard composite tanks and works with any standard RO faucet with 1/4-inch tubing connections. This system is suitable for households with moderate water usage, producing approximately 50 gallons per day under standard conditions.

🔧 Pro Tip: The built-in check valves in each cartridge head prevent backflow automatically, but always close the feed water valve before removing cartridges to avoid spillage. Mark your calendar for filter changes when you install—sediment and carbon pre-filters typically need replacement every 6-12 months, while the RO membrane can last 2-3 years depending on water quality.
Select '----Optional---
From $217.00

Original: $620.00

-65%
Watts (WQC4RO11-50MTNF) 4 Stage KWIK CHANGE RO System 50 GPD w- Metal Tank—

$620.00

$217.00

Description

The Watts WQC4RO11-50MTNF delivers 50 gallons per day of purified water through a four-stage reverse osmosis system with tool-free cartridge changes. The KWIK CHANGE design eliminates traditional filter sumps, making maintenance faster and cleaner than conventional RO systems.
SPECIFICATIONS

Watts WQC4RO11-50MTNF Technical Details

Model Number WQC4RO11-50MTNF
Production Rate 50 GPD
Filtration Stages 4-Stage System
Storage Tank 3.2 Gallon Metal Tank
Maximum TDS 2,000 PPM
Operating Pressure 100 PSI Maximum
Certification WQA Gold Seal, NSF/ANSI 58
Connection Type Quick Connect Fittings
FILTRATION PROCESS

Four-Stage Purification

SEDIMENT
Pre-filter captures sand, silt, and rust particles to protect downstream filters
CARBON
Pre-filter reduces chlorine, taste, and odor compounds from municipal water
MEMBRANE
RO membrane removes up to 99% of TDS, lead, and dissolved contaminants
POLISH
Carbon post-filter refines taste and removes any residual odors before dispensing
INSTALLATION & USE

Setup and Maintenance

  1. Mount the manifold assembly under the sink and position the metal storage tank in an accessible location with the quick connect fittings facing the manifold.
  2. Connect the feed water line to the inlet using the included quick connect fittings, then attach the drain line and storage tank connections to the appropriate ports.
  3. Install all four KWIK CHANGE cartridges by aligning and twisting a quarter turn clockwise until they lock into place with the double o-ring seals.
  4. Open the feed water valve slowly and check all connections for leaks while the system pressurizes and begins filling the storage tank.
  5. Replace cartridges by turning a quarter turn counterclockwise to remove, then installing new filters with a quarter turn clockwise—no tools or sump wrenches required.
COMPATIBILITY

System Requirements

The Watts WQC4RO11-50MTNF is designed for residential point-of-use installation on municipal or well water supplies with TDS levels up to 2,000 PPM. The system requires inlet water pressure between 40 and 100 PSI for optimal performance. All KWIK CHANGE cartridges are proprietary to Watts systems and use quarter-turn installation without traditional filter sumps. The included metal storage tank provides more durability than standard composite tanks and works with any standard RO faucet with 1/4-inch tubing connections. This system is suitable for households with moderate water usage, producing approximately 50 gallons per day under standard conditions.

🔧 Pro Tip: The built-in check valves in each cartridge head prevent backflow automatically, but always close the feed water valve before removing cartridges to avoid spillage. Mark your calendar for filter changes when you install—sediment and carbon pre-filters typically need replacement every 6-12 months, while the RO membrane can last 2-3 years depending on water quality.
Watts (WQC4RO11-50MTNF) 4 Stage KWIK CHANGE RO System 50 GPD w- Metal Tank | Isopure Water