HomeStore

5 Micron 10" x 4.5" Full Flow Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration

Product image 1

5 Micron 10" x 4.5" Full Flow Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration

This 5 micron meltblown polypropylene sediment cartridge from IPW Industries delivers whole-house protection against sand, silt, rust, and particulate down to 5 microns. Designed with graded density layers, the 10" x 4.5" full flow cartridge captures larger debris at the outer surface while finer particles are trapped progressively toward the core.
SPECIFICATIONS

10" x 4.5" Full Flow Sediment Cartridge

Micron Rating 5 Micron
Dimensions 10" x 4.5"
Flow Rate 5 GPM
Filter Life 10,000 gallons
Operating Temperature 39°F - 125°F (4°C - 52°C)
Max Operating Pressure 60 psi
Material Meltblown polypropylene
Replacement Schedule Every 4-6 months
INSTALLATION & USE

Cartridge Replacement Process

  1. Shut off water supply and relieve pressure by opening a downstream faucet
  2. Unscrew housing using a filter wrench, remove old cartridge, and clean sump with mild soap
  3. Remove shrink wrap from new cartridge and insert into housing, ensuring proper seating
  4. Lubricate o-ring with food-grade silicone grease and hand-tighten housing back onto cap
  5. Turn water supply on slowly, check for leaks, and flush system for 3-5 minutes before use
COMPATIBILITY

Housing & System Fitment

This 10" x 4.5" full flow sediment cartridge fits most standard whole-house filter housings with 4.5" diameter sumps, including brands like Pentek, Culligan, GE, DuPont, Omnifilter, and generic 10-inch Big Blue systems. The larger 4.5" diameter provides higher flow capacity compared to standard 2.5" cartridges, making it ideal for whole-house applications, well water pretreatment, and aquarium supply lines where sediment load is moderate to heavy.

🔧 Pro tip: Mark your calendar when you install a new cartridge. If you notice pressure drop or discolored water before the 4-6 month mark, your sediment load is heavier than average and you should shorten replacement intervals accordingly.
This 5 micron meltblown polypropylene sediment cartridge from IPW Industries delivers whole-house protection against sand, silt, rust, and particulate down to 5 microns. Designed with graded density layers, the 10" x 4.5" full flow cartridge captures larger debris at the outer surface while finer particles are trapped progressively toward the core.
SPECIFICATIONS

10" x 4.5" Full Flow Sediment Cartridge

Micron Rating 5 Micron
Dimensions 10" x 4.5"
Flow Rate 5 GPM
Filter Life 10,000 gallons
Operating Temperature 39°F - 125°F (4°C - 52°C)
Max Operating Pressure 60 psi
Material Meltblown polypropylene
Replacement Schedule Every 4-6 months
INSTALLATION & USE

Cartridge Replacement Process

  1. Shut off water supply and relieve pressure by opening a downstream faucet
  2. Unscrew housing using a filter wrench, remove old cartridge, and clean sump with mild soap
  3. Remove shrink wrap from new cartridge and insert into housing, ensuring proper seating
  4. Lubricate o-ring with food-grade silicone grease and hand-tighten housing back onto cap
  5. Turn water supply on slowly, check for leaks, and flush system for 3-5 minutes before use
COMPATIBILITY

Housing & System Fitment

This 10" x 4.5" full flow sediment cartridge fits most standard whole-house filter housings with 4.5" diameter sumps, including brands like Pentek, Culligan, GE, DuPont, Omnifilter, and generic 10-inch Big Blue systems. The larger 4.5" diameter provides higher flow capacity compared to standard 2.5" cartridges, making it ideal for whole-house applications, well water pretreatment, and aquarium supply lines where sediment load is moderate to heavy.

🔧 Pro tip: Mark your calendar when you install a new cartridge. If you notice pressure drop or discolored water before the 4-6 month mark, your sediment load is heavier than average and you should shorten replacement intervals accordingly.
$11.00
5 Micron 10" x 4.5" Full Flow Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration—
$11.00

Description

This 5 micron meltblown polypropylene sediment cartridge from IPW Industries delivers whole-house protection against sand, silt, rust, and particulate down to 5 microns. Designed with graded density layers, the 10" x 4.5" full flow cartridge captures larger debris at the outer surface while finer particles are trapped progressively toward the core.
SPECIFICATIONS

10" x 4.5" Full Flow Sediment Cartridge

Micron Rating 5 Micron
Dimensions 10" x 4.5"
Flow Rate 5 GPM
Filter Life 10,000 gallons
Operating Temperature 39°F - 125°F (4°C - 52°C)
Max Operating Pressure 60 psi
Material Meltblown polypropylene
Replacement Schedule Every 4-6 months
INSTALLATION & USE

Cartridge Replacement Process

  1. Shut off water supply and relieve pressure by opening a downstream faucet
  2. Unscrew housing using a filter wrench, remove old cartridge, and clean sump with mild soap
  3. Remove shrink wrap from new cartridge and insert into housing, ensuring proper seating
  4. Lubricate o-ring with food-grade silicone grease and hand-tighten housing back onto cap
  5. Turn water supply on slowly, check for leaks, and flush system for 3-5 minutes before use
COMPATIBILITY

Housing & System Fitment

This 10" x 4.5" full flow sediment cartridge fits most standard whole-house filter housings with 4.5" diameter sumps, including brands like Pentek, Culligan, GE, DuPont, Omnifilter, and generic 10-inch Big Blue systems. The larger 4.5" diameter provides higher flow capacity compared to standard 2.5" cartridges, making it ideal for whole-house applications, well water pretreatment, and aquarium supply lines where sediment load is moderate to heavy.

🔧 Pro tip: Mark your calendar when you install a new cartridge. If you notice pressure drop or discolored water before the 4-6 month mark, your sediment load is heavier than average and you should shorten replacement intervals accordingly.