Compatible to Intelifil (IF-SM-AA020) 20"x2.5" 12,000 mg-L Activated Alumina Fluoride Removal Filter by IPW Industries Inc
20"x2.5" Activated Alumina Fluoride Removal Filter
Compatible replacement for Intelifil IF-SM-AA020. Removes fluoride, arsenic, and other contaminants using high-capacity activated alumina media rated for 12,000 mg/L
Activated alumina targets fluoride through chemisorption, binding contaminants at the molecular level
Fluoride Reduction
Brings effluent levels below 0.2 ppm from 10 ppm feed water. Effective against naturally occurring fluoride in well water and whole-house applications
Multi-Contaminant Media
Removes inorganic arsenic, hydrogen sulfide, hydrogen chloride, carbonyl sulfide, alcohols, and ethers alongside fluoride
12,000 mg/L Capacity
Handles approximately 2,750 gallons at 10 ppm feed with 0.25 GPM flow rate. Capacity decreases with high bicarbonate levels
Standard Cartridge Fit
20 inch by 2.5 inch dimensions fit standard whole-house or well water filter housings rated for 40°F to 100°F operation
Direct replacement for Intelifil IF-SM-AA020
This IPW Industries filter is compatible with any standard 20"x2.5" filter housing designed for Intelifil IF-SM-AA020 cartridges. Fits Watts and other brand housings rated for specialty media filters. Designed for well water and whole-house fluoride removal systems where high fluoride levels exceed safe drinking water standards.
Replacement schedule depends on feed water chemistry
Standard Capacity
Rated for 12,000 mg/L total fluoride removal or approximately 2,750 gallons at 10 ppm feed concentration with 0.25 GPM flow rate
Water Chemistry Impact
High bicarbonate levels reduce capacity significantly. Above 100 ppm bicarbonate, reduce expected capacity by 50%. Above 200 ppm, reduce by 75%
Flow Rate Limit
Do not exceed 0.25 GPM for maximum effectiveness. Higher flow rates reduce contact time and decrease fluoride removal efficiency
Health Protection
Reduces fluoride below 2 mg/L to prevent dental fluorosis and below 4 mg/L to avoid serious health risks from chronic exposure
Well & Whole-House
Designed for point-of-entry systems where naturally occurring fluoride levels are dangerously high in groundwater sources
Proven Media
Activated alumina is EPA-recognized for fluoride and arsenic removal with predictable performance when properly sized for water chemistry
20"x2.5" Activated Alumina Fluoride Removal Filter
Compatible replacement for Intelifil IF-SM-AA020. Removes fluoride, arsenic, and other contaminants using high-capacity activated alumina media rated for 12,000 mg/L
Activated alumina targets fluoride through chemisorption, binding contaminants at the molecular level
Fluoride Reduction
Brings effluent levels below 0.2 ppm from 10 ppm feed water. Effective against naturally occurring fluoride in well water and whole-house applications
Multi-Contaminant Media
Removes inorganic arsenic, hydrogen sulfide, hydrogen chloride, carbonyl sulfide, alcohols, and ethers alongside fluoride
12,000 mg/L Capacity
Handles approximately 2,750 gallons at 10 ppm feed with 0.25 GPM flow rate. Capacity decreases with high bicarbonate levels
Standard Cartridge Fit
20 inch by 2.5 inch dimensions fit standard whole-house or well water filter housings rated for 40°F to 100°F operation
Direct replacement for Intelifil IF-SM-AA020
This IPW Industries filter is compatible with any standard 20"x2.5" filter housing designed for Intelifil IF-SM-AA020 cartridges. Fits Watts and other brand housings rated for specialty media filters. Designed for well water and whole-house fluoride removal systems where high fluoride levels exceed safe drinking water standards.
Replacement schedule depends on feed water chemistry
Standard Capacity
Rated for 12,000 mg/L total fluoride removal or approximately 2,750 gallons at 10 ppm feed concentration with 0.25 GPM flow rate
Water Chemistry Impact
High bicarbonate levels reduce capacity significantly. Above 100 ppm bicarbonate, reduce expected capacity by 50%. Above 200 ppm, reduce by 75%
Flow Rate Limit
Do not exceed 0.25 GPM for maximum effectiveness. Higher flow rates reduce contact time and decrease fluoride removal efficiency
Health Protection
Reduces fluoride below 2 mg/L to prevent dental fluorosis and below 4 mg/L to avoid serious health risks from chronic exposure
Well & Whole-House
Designed for point-of-entry systems where naturally occurring fluoride levels are dangerously high in groundwater sources
Proven Media
Activated alumina is EPA-recognized for fluoride and arsenic removal with predictable performance when properly sized for water chemistry
Description
20"x2.5" Activated Alumina Fluoride Removal Filter
Compatible replacement for Intelifil IF-SM-AA020. Removes fluoride, arsenic, and other contaminants using high-capacity activated alumina media rated for 12,000 mg/L
Activated alumina targets fluoride through chemisorption, binding contaminants at the molecular level
Fluoride Reduction
Brings effluent levels below 0.2 ppm from 10 ppm feed water. Effective against naturally occurring fluoride in well water and whole-house applications
Multi-Contaminant Media
Removes inorganic arsenic, hydrogen sulfide, hydrogen chloride, carbonyl sulfide, alcohols, and ethers alongside fluoride
12,000 mg/L Capacity
Handles approximately 2,750 gallons at 10 ppm feed with 0.25 GPM flow rate. Capacity decreases with high bicarbonate levels
Standard Cartridge Fit
20 inch by 2.5 inch dimensions fit standard whole-house or well water filter housings rated for 40°F to 100°F operation
Direct replacement for Intelifil IF-SM-AA020
This IPW Industries filter is compatible with any standard 20"x2.5" filter housing designed for Intelifil IF-SM-AA020 cartridges. Fits Watts and other brand housings rated for specialty media filters. Designed for well water and whole-house fluoride removal systems where high fluoride levels exceed safe drinking water standards.
Replacement schedule depends on feed water chemistry
Standard Capacity
Rated for 12,000 mg/L total fluoride removal or approximately 2,750 gallons at 10 ppm feed concentration with 0.25 GPM flow rate
Water Chemistry Impact
High bicarbonate levels reduce capacity significantly. Above 100 ppm bicarbonate, reduce expected capacity by 50%. Above 200 ppm, reduce by 75%
Flow Rate Limit
Do not exceed 0.25 GPM for maximum effectiveness. Higher flow rates reduce contact time and decrease fluoride removal efficiency
Health Protection
Reduces fluoride below 2 mg/L to prevent dental fluorosis and below 4 mg/L to avoid serious health risks from chronic exposure
Well & Whole-House
Designed for point-of-entry systems where naturally occurring fluoride levels are dangerously high in groundwater sources
Proven Media
Activated alumina is EPA-recognized for fluoride and arsenic removal with predictable performance when properly sized for water chemistry
