Microfilter (UV-610T120) UV Ballast for UV-610 AC 120V-60Hz 6 Watts 125MA
UV-610T120 Ballast Technical Details
| Model Number | UV-610T120 |
| Manufacturer | Microfilter |
| Compatible System | UV-610 UV Disinfection System |
| Input Voltage | AC 120V, 60Hz |
| Power Output | 6 Watts |
| Current Rating | 125mA |
| Alternate Part Number | OPP625 |
| Application | UV Lamp Power Supply |
Ballast Replacement Steps
- Disconnect power to the UV system at the breaker or unplug the unit completely before beginning any electrical work.
- Remove the ballast cover or housing panel on your UV-610 unit to access the existing ballast and wire connections.
- Disconnect wires from the old ballast (note wire positions or take a photo for reference), remove mounting hardware, and install the UV-610T120 in the same orientation.
- Reconnect wires according to the wiring diagram on the ballast label or your reference photo, ensuring all connections are secure and properly insulated.
- Replace the cover, restore power, and verify the UV lamp illuminates properly within 30 seconds of startup.
System Compatibility
The UV-610T120 ballast is engineered specifically for the Microfilter UV-610 ultraviolet water disinfection system. This ballast is also cross-referenced as OPP625 and provides the precise electrical characteristics required to power the UV-610 lamp at optimal germicidal wavelength. Not interchangeable with other UV system ballasts without verifying voltage, wattage, and connector compatibility. Standard North American 120V 60Hz electrical supply required.
UV-610T120 Ballast Technical Details
| Model Number | UV-610T120 |
| Manufacturer | Microfilter |
| Compatible System | UV-610 UV Disinfection System |
| Input Voltage | AC 120V, 60Hz |
| Power Output | 6 Watts |
| Current Rating | 125mA |
| Alternate Part Number | OPP625 |
| Application | UV Lamp Power Supply |
Ballast Replacement Steps
- Disconnect power to the UV system at the breaker or unplug the unit completely before beginning any electrical work.
- Remove the ballast cover or housing panel on your UV-610 unit to access the existing ballast and wire connections.
- Disconnect wires from the old ballast (note wire positions or take a photo for reference), remove mounting hardware, and install the UV-610T120 in the same orientation.
- Reconnect wires according to the wiring diagram on the ballast label or your reference photo, ensuring all connections are secure and properly insulated.
- Replace the cover, restore power, and verify the UV lamp illuminates properly within 30 seconds of startup.
System Compatibility
The UV-610T120 ballast is engineered specifically for the Microfilter UV-610 ultraviolet water disinfection system. This ballast is also cross-referenced as OPP625 and provides the precise electrical characteristics required to power the UV-610 lamp at optimal germicidal wavelength. Not interchangeable with other UV system ballasts without verifying voltage, wattage, and connector compatibility. Standard North American 120V 60Hz electrical supply required.
Original: $22.63
-65%$22.63
$7.92Description
UV-610T120 Ballast Technical Details
| Model Number | UV-610T120 |
| Manufacturer | Microfilter |
| Compatible System | UV-610 UV Disinfection System |
| Input Voltage | AC 120V, 60Hz |
| Power Output | 6 Watts |
| Current Rating | 125mA |
| Alternate Part Number | OPP625 |
| Application | UV Lamp Power Supply |
Ballast Replacement Steps
- Disconnect power to the UV system at the breaker or unplug the unit completely before beginning any electrical work.
- Remove the ballast cover or housing panel on your UV-610 unit to access the existing ballast and wire connections.
- Disconnect wires from the old ballast (note wire positions or take a photo for reference), remove mounting hardware, and install the UV-610T120 in the same orientation.
- Reconnect wires according to the wiring diagram on the ballast label or your reference photo, ensuring all connections are secure and properly insulated.
- Replace the cover, restore power, and verify the UV lamp illuminates properly within 30 seconds of startup.
System Compatibility
The UV-610T120 ballast is engineered specifically for the Microfilter UV-610 ultraviolet water disinfection system. This ballast is also cross-referenced as OPP625 and provides the precise electrical characteristics required to power the UV-610 lamp at optimal germicidal wavelength. Not interchangeable with other UV system ballasts without verifying voltage, wattage, and connector compatibility. Standard North American 120V 60Hz electrical supply required.
