HomeStore

Omnipure (K2550-G/C/M-KK)2"X10" 1/3 GAC-1/3 CALC - 1/3MAG; 3/8" FQC

No images

Omnipure (K2550-G/C/M-KK)2"X10" 1/3 GAC-1/3 CALC - 1/3MAG; 3/8" FQC

Omnipure K-Series Inline Filter

K2550-G/C/M-KK Multi-Media Cartridge

2" x 10" triple-media inline filter combining granular activated carbon, calcite, and magnesium oxide with quick-connect fittings for balanced filtration and mineral enhancement

1/3 GAC 1/3 Calcite 1/3 Magnesium 3/8" FQC
WHY IT WORKS

Three filtration zones in one compact cartridge

🌊

Granular Activated Carbon

First third removes chlorine, taste, odor, and organic contaminants through adsorption while allowing good flow rates through the K2550 body

⚖️

Calcite Media

Middle section raises pH and adds calcium to water, neutralizing acidity common in RO systems or naturally acidic water supplies

💎

Magnesium Oxide

Final third introduces magnesium for mineral balance, enhancing both taste and health benefits of finished water

🔧

Quick-Connect Ready

3/8" female quick-connect fittings on both ends simplify installation in RO systems or inline applications without threading or adapters

COMPATIBILITY

Fits standard Omnipure K-Series housings and inline systems

The Omnipure K2550-G/C/M-KK works in any 2" x 10" inline filter housing or system designed for K-Series cartridges with 3/8" quick-connect ports. Common in post-RO remineralization stages, countertop systems, and refrigerator lines where both filtration and mineral addition are needed. Compatible with Omnipure housings, APEC systems, iSpring units, and other brands using standard K-size cartridges with FQC fittings.

MAINTENANCE

Replace based on water volume and pH performance

6-12 months

Typical Replacement

For average household use as a post-RO remineralizer or inline filter. Replace when pH adjustment weakens or taste declines.

Monitor pH

Performance Check

Test output pH monthly. If pH stops rising or calcium/magnesium media depletes, replace the K2550-G/C/M-KK cartridge.

500-750 gal

Volume Guide

Media capacity varies with source water chemistry. Heavy use or very low pH water may require more frequent replacement.

🔄

Multi-Function Design

Combines carbon filtration with calcite and magnesium remineralization in one 2" x 10" Omnipure cartridge

Quick-Connect Convenience

3/8" FQC fittings on the K2550 allow tool-free installation and cartridge changes in seconds

🎯

pH Balance

Ideal for post-RO systems where acidic water needs neutralization and beneficial mineral restoration

🏆

Omnipure Quality

K-Series cartridges from Omnipure deliver reliable performance with NSF-certified materials and precise manufacturing

Omnipure K-Series Inline Filter

K2550-G/C/M-KK Multi-Media Cartridge

2" x 10" triple-media inline filter combining granular activated carbon, calcite, and magnesium oxide with quick-connect fittings for balanced filtration and mineral enhancement

1/3 GAC 1/3 Calcite 1/3 Magnesium 3/8" FQC
WHY IT WORKS

Three filtration zones in one compact cartridge

🌊

Granular Activated Carbon

First third removes chlorine, taste, odor, and organic contaminants through adsorption while allowing good flow rates through the K2550 body

⚖️

Calcite Media

Middle section raises pH and adds calcium to water, neutralizing acidity common in RO systems or naturally acidic water supplies

💎

Magnesium Oxide

Final third introduces magnesium for mineral balance, enhancing both taste and health benefits of finished water

🔧

Quick-Connect Ready

3/8" female quick-connect fittings on both ends simplify installation in RO systems or inline applications without threading or adapters

COMPATIBILITY

Fits standard Omnipure K-Series housings and inline systems

The Omnipure K2550-G/C/M-KK works in any 2" x 10" inline filter housing or system designed for K-Series cartridges with 3/8" quick-connect ports. Common in post-RO remineralization stages, countertop systems, and refrigerator lines where both filtration and mineral addition are needed. Compatible with Omnipure housings, APEC systems, iSpring units, and other brands using standard K-size cartridges with FQC fittings.

MAINTENANCE

Replace based on water volume and pH performance

6-12 months

Typical Replacement

For average household use as a post-RO remineralizer or inline filter. Replace when pH adjustment weakens or taste declines.

Monitor pH

Performance Check

Test output pH monthly. If pH stops rising or calcium/magnesium media depletes, replace the K2550-G/C/M-KK cartridge.

500-750 gal

Volume Guide

Media capacity varies with source water chemistry. Heavy use or very low pH water may require more frequent replacement.

🔄

Multi-Function Design

Combines carbon filtration with calcite and magnesium remineralization in one 2" x 10" Omnipure cartridge

Quick-Connect Convenience

3/8" FQC fittings on the K2550 allow tool-free installation and cartridge changes in seconds

🎯

pH Balance

Ideal for post-RO systems where acidic water needs neutralization and beneficial mineral restoration

🏆

Omnipure Quality

K-Series cartridges from Omnipure deliver reliable performance with NSF-certified materials and precise manufacturing

$24.49
Omnipure (K2550-G/C/M-KK)2"X10" 1/3 GAC-1/3 CALC - 1/3MAG; 3/8" FQC
$24.49

Description

Omnipure K-Series Inline Filter

K2550-G/C/M-KK Multi-Media Cartridge

2" x 10" triple-media inline filter combining granular activated carbon, calcite, and magnesium oxide with quick-connect fittings for balanced filtration and mineral enhancement

1/3 GAC 1/3 Calcite 1/3 Magnesium 3/8" FQC
WHY IT WORKS

Three filtration zones in one compact cartridge

🌊

Granular Activated Carbon

First third removes chlorine, taste, odor, and organic contaminants through adsorption while allowing good flow rates through the K2550 body

⚖️

Calcite Media

Middle section raises pH and adds calcium to water, neutralizing acidity common in RO systems or naturally acidic water supplies

💎

Magnesium Oxide

Final third introduces magnesium for mineral balance, enhancing both taste and health benefits of finished water

🔧

Quick-Connect Ready

3/8" female quick-connect fittings on both ends simplify installation in RO systems or inline applications without threading or adapters

COMPATIBILITY

Fits standard Omnipure K-Series housings and inline systems

The Omnipure K2550-G/C/M-KK works in any 2" x 10" inline filter housing or system designed for K-Series cartridges with 3/8" quick-connect ports. Common in post-RO remineralization stages, countertop systems, and refrigerator lines where both filtration and mineral addition are needed. Compatible with Omnipure housings, APEC systems, iSpring units, and other brands using standard K-size cartridges with FQC fittings.

MAINTENANCE

Replace based on water volume and pH performance

6-12 months

Typical Replacement

For average household use as a post-RO remineralizer or inline filter. Replace when pH adjustment weakens or taste declines.

Monitor pH

Performance Check

Test output pH monthly. If pH stops rising or calcium/magnesium media depletes, replace the K2550-G/C/M-KK cartridge.

500-750 gal

Volume Guide

Media capacity varies with source water chemistry. Heavy use or very low pH water may require more frequent replacement.

🔄

Multi-Function Design

Combines carbon filtration with calcite and magnesium remineralization in one 2" x 10" Omnipure cartridge

Quick-Connect Convenience

3/8" FQC fittings on the K2550 allow tool-free installation and cartridge changes in seconds

🎯

pH Balance

Ideal for post-RO systems where acidic water needs neutralization and beneficial mineral restoration

🏆

Omnipure Quality

K-Series cartridges from Omnipure deliver reliable performance with NSF-certified materials and precise manufacturing

Omnipure (K2550-G/C/M-KK)2"X10" 1/3 GAC-1/3 CALC - 1/3MAG; 3/8" FQC | Isopure Water