HomeStore

Pack of 3 Filter (WPC20-975) 9.75"X2.75" 20 Micron Pleated Sediment Filters

Product image 1

Pack of 3 Filter (WPC20-975) 9.75"X2.75" 20 Micron Pleated Sediment Filters

The WPC20-975 pleated sediment filter from IPW Industries delivers superior dirt-holding capacity and longer service life than traditional wound or spun cartridges. This 3-pack of 9.75"x2.75" filters features 100% synthetic, cellulose-free media rated at 20 micron for whole-house and RO pre-filtration applications.
SPECIFICATIONS

WPC20-975 Filter Technical Details

Dimensions 9.75" x 2.75" OD
Micron Rating 20 micron
Filter Media Cellulose-free synthetic pleated polypropylene
Temperature Range 40°F to 140°F (4.4°C to 60°C)
Maximum Pressure 40 psid
Recommended Change 25 psid differential
End Caps Molded polyurethane
Center Tube Polypropylene (1-1/6" ID)
INSTALLATION & USE

Filter Installation Process

  1. Shut off water supply and relieve system pressure before removing old filter cartridge from housing
  2. Remove WPC20-975 filter from individual wrapper and inspect gaskets for proper seating on both end caps
  3. Insert filter into housing, ensuring center tube aligns properly with housing standpipe
  4. Hand-tighten housing sump and slowly restore water pressure, checking for leaks at all connection points
  5. Flush system for 3-5 minutes to remove any manufacturing residue before returning to normal service
COMPATIBILITY

Applications & System Fit

The WPC20-975 fits standard 10" filter housings with 2.75" OD cartridge compatibility. Ideal for whole-house sediment filtration and as pre-filtration for reverse osmosis systems. The 20 micron rating effectively removes sand, silt, rust, and particulate while maintaining high flow rates. Compatible with municipal and well water applications where sediment reduction is required before carbon filtration or membrane filtration stages.

🔧 Pro tip: Pleated filters rated 5 micron and above can be cleaned and reused. Spray water directly into the pleats from the inside out to dislodge trapped sediment, extending filter life by 2-3x before replacement is needed.
The WPC20-975 pleated sediment filter from IPW Industries delivers superior dirt-holding capacity and longer service life than traditional wound or spun cartridges. This 3-pack of 9.75"x2.75" filters features 100% synthetic, cellulose-free media rated at 20 micron for whole-house and RO pre-filtration applications.
SPECIFICATIONS

WPC20-975 Filter Technical Details

Dimensions 9.75" x 2.75" OD
Micron Rating 20 micron
Filter Media Cellulose-free synthetic pleated polypropylene
Temperature Range 40°F to 140°F (4.4°C to 60°C)
Maximum Pressure 40 psid
Recommended Change 25 psid differential
End Caps Molded polyurethane
Center Tube Polypropylene (1-1/6" ID)
INSTALLATION & USE

Filter Installation Process

  1. Shut off water supply and relieve system pressure before removing old filter cartridge from housing
  2. Remove WPC20-975 filter from individual wrapper and inspect gaskets for proper seating on both end caps
  3. Insert filter into housing, ensuring center tube aligns properly with housing standpipe
  4. Hand-tighten housing sump and slowly restore water pressure, checking for leaks at all connection points
  5. Flush system for 3-5 minutes to remove any manufacturing residue before returning to normal service
COMPATIBILITY

Applications & System Fit

The WPC20-975 fits standard 10" filter housings with 2.75" OD cartridge compatibility. Ideal for whole-house sediment filtration and as pre-filtration for reverse osmosis systems. The 20 micron rating effectively removes sand, silt, rust, and particulate while maintaining high flow rates. Compatible with municipal and well water applications where sediment reduction is required before carbon filtration or membrane filtration stages.

🔧 Pro tip: Pleated filters rated 5 micron and above can be cleaned and reused. Spray water directly into the pleats from the inside out to dislodge trapped sediment, extending filter life by 2-3x before replacement is needed.
$35.96
Pack of 3 Filter (WPC20-975) 9.75"X2.75" 20 Micron Pleated Sediment Filters—
$35.96

Description

The WPC20-975 pleated sediment filter from IPW Industries delivers superior dirt-holding capacity and longer service life than traditional wound or spun cartridges. This 3-pack of 9.75"x2.75" filters features 100% synthetic, cellulose-free media rated at 20 micron for whole-house and RO pre-filtration applications.
SPECIFICATIONS

WPC20-975 Filter Technical Details

Dimensions 9.75" x 2.75" OD
Micron Rating 20 micron
Filter Media Cellulose-free synthetic pleated polypropylene
Temperature Range 40°F to 140°F (4.4°C to 60°C)
Maximum Pressure 40 psid
Recommended Change 25 psid differential
End Caps Molded polyurethane
Center Tube Polypropylene (1-1/6" ID)
INSTALLATION & USE

Filter Installation Process

  1. Shut off water supply and relieve system pressure before removing old filter cartridge from housing
  2. Remove WPC20-975 filter from individual wrapper and inspect gaskets for proper seating on both end caps
  3. Insert filter into housing, ensuring center tube aligns properly with housing standpipe
  4. Hand-tighten housing sump and slowly restore water pressure, checking for leaks at all connection points
  5. Flush system for 3-5 minutes to remove any manufacturing residue before returning to normal service
COMPATIBILITY

Applications & System Fit

The WPC20-975 fits standard 10" filter housings with 2.75" OD cartridge compatibility. Ideal for whole-house sediment filtration and as pre-filtration for reverse osmosis systems. The 20 micron rating effectively removes sand, silt, rust, and particulate while maintaining high flow rates. Compatible with municipal and well water applications where sediment reduction is required before carbon filtration or membrane filtration stages.

🔧 Pro tip: Pleated filters rated 5 micron and above can be cleaned and reused. Spray water directly into the pleats from the inside out to dislodge trapped sediment, extending filter life by 2-3x before replacement is needed.