Pentek - CW-F - 10" x 2.5" String Wound Polypropylene Sediment 10 Micron Filter
Pentek CW-F Technical Details
| Model Number | CW-F (155186-43) |
| Dimensions | 10" x 2.5" (9-7/8" x 2-1/2" actual) |
| Micron Rating | 10 micron (nominal) |
| Filter Media | Polypropylene fiber cord, string wound |
| Core Material | Rigid polypropylene |
| Flow Rate | 7-10 GPM |
| Temperature Range | 40°F to 125°F (4.4°C to 51.7°C) |
| Pressure Drop | 1 psi @ 10 GPM |
How to Install Your CW-F Filter
- Shut off water supply and relieve system pressure by opening a downstream faucet before removing your filter housing sump.
- Remove the old cartridge and clean the housing sump with a mild bleach solution, then rinse thoroughly to remove sediment buildup.
- Insert the new Pentek CW-F cartridge into the housing, ensuring the center core is properly seated on the standpipe at the base.
- Lubricate the O-ring with clean silicone grease, thread the sump back onto the cap hand-tight, then restore water pressure and check for leaks.
- Run water for 2-3 minutes to flush any air and loose fibers from the new cartridge before regular use.
Works With Standard 10-Inch Housings
The Pentek CW-F fits all standard 10-inch filter housings designed for 2.5-inch diameter cartridges. It is compatible with whole house filtration systems, reverse osmosis pre-filtration stages, and point-of-use applications using municipal or well water. This filter is suitable for sediment reduction in residential, commercial, and light industrial water treatment installations. Replace every 3-6 months depending on sediment load and water quality.
Pentek CW-F Technical Details
| Model Number | CW-F (155186-43) |
| Dimensions | 10" x 2.5" (9-7/8" x 2-1/2" actual) |
| Micron Rating | 10 micron (nominal) |
| Filter Media | Polypropylene fiber cord, string wound |
| Core Material | Rigid polypropylene |
| Flow Rate | 7-10 GPM |
| Temperature Range | 40°F to 125°F (4.4°C to 51.7°C) |
| Pressure Drop | 1 psi @ 10 GPM |
How to Install Your CW-F Filter
- Shut off water supply and relieve system pressure by opening a downstream faucet before removing your filter housing sump.
- Remove the old cartridge and clean the housing sump with a mild bleach solution, then rinse thoroughly to remove sediment buildup.
- Insert the new Pentek CW-F cartridge into the housing, ensuring the center core is properly seated on the standpipe at the base.
- Lubricate the O-ring with clean silicone grease, thread the sump back onto the cap hand-tight, then restore water pressure and check for leaks.
- Run water for 2-3 minutes to flush any air and loose fibers from the new cartridge before regular use.
Works With Standard 10-Inch Housings
The Pentek CW-F fits all standard 10-inch filter housings designed for 2.5-inch diameter cartridges. It is compatible with whole house filtration systems, reverse osmosis pre-filtration stages, and point-of-use applications using municipal or well water. This filter is suitable for sediment reduction in residential, commercial, and light industrial water treatment installations. Replace every 3-6 months depending on sediment load and water quality.
Original: $8.82
-65%$8.82
$3.09Description
Pentek CW-F Technical Details
| Model Number | CW-F (155186-43) |
| Dimensions | 10" x 2.5" (9-7/8" x 2-1/2" actual) |
| Micron Rating | 10 micron (nominal) |
| Filter Media | Polypropylene fiber cord, string wound |
| Core Material | Rigid polypropylene |
| Flow Rate | 7-10 GPM |
| Temperature Range | 40°F to 125°F (4.4°C to 51.7°C) |
| Pressure Drop | 1 psi @ 10 GPM |
How to Install Your CW-F Filter
- Shut off water supply and relieve system pressure by opening a downstream faucet before removing your filter housing sump.
- Remove the old cartridge and clean the housing sump with a mild bleach solution, then rinse thoroughly to remove sediment buildup.
- Insert the new Pentek CW-F cartridge into the housing, ensuring the center core is properly seated on the standpipe at the base.
- Lubricate the O-ring with clean silicone grease, thread the sump back onto the cap hand-tight, then restore water pressure and check for leaks.
- Run water for 2-3 minutes to flush any air and loose fibers from the new cartridge before regular use.
Works With Standard 10-Inch Housings
The Pentek CW-F fits all standard 10-inch filter housings designed for 2.5-inch diameter cartridges. It is compatible with whole house filtration systems, reverse osmosis pre-filtration stages, and point-of-use applications using municipal or well water. This filter is suitable for sediment reduction in residential, commercial, and light industrial water treatment installations. Replace every 3-6 months depending on sediment load and water quality.
