Puregen (QGA-25002) 12" PROQ GAC Filter
The Puregen QGA-25002 is a 12-inch granular activated carbon filter designed to remove chlorine, taste, odor, and organic chemicals from your water supply. Built with high-quality activated carbon media, this GAC filter delivers reliable performance at flow rates up to 0.5 GPM and operating pressures between 35 and 100 PSI.
SPECIFICATIONS
Technical Details
| Model Number | QGA-25002 |
| Filter Dimensions | 12 inches length |
| Media Type | Granular Activated Carbon (GAC) |
| Flow Rate | 0.5 GPM |
| Operating Pressure | 35 - 100 PSI |
| Primary Contaminants Removed | Chlorine, organic chemicals, taste and odor |
| Manufacturer | Puregen |
INSTALLATION & USE
Setup Instructions
- Shut off water supply and relieve system pressure before removing the old filter cartridge.
- Insert the Puregen QGA-25002 into a compatible 12-inch standard filter housing, ensuring proper alignment and seal.
- Hand-tighten the housing sump, turn on water supply slowly, and check for leaks around the housing O-ring.
- Flush the new GAC filter for 3-5 minutes to remove carbon fines and activate the media before normal use.
- Replace the cartridge every 6-12 months depending on water quality and usage volume.
COMPATIBILITY
Housing Requirements
The Puregen QGA-25002 fits standard 12-inch filter housings with 2.5-inch diameter cartridge capacity. This GAC filter is commonly used in whole-house filtration systems, point-of-use applications, and pre-filtration stages for reverse osmosis systems. Verify your housing accepts standard 12-inch cartridges before ordering.
🔧 Pro tip: Always flush GAC filters thoroughly after installation. Carbon fines are normal and harmless but will cloud your water if not flushed out. Run water through the filter for at least 5 minutes before connecting it to appliances or drinking water lines.
The Puregen QGA-25002 is a 12-inch granular activated carbon filter designed to remove chlorine, taste, odor, and organic chemicals from your water supply. Built with high-quality activated carbon media, this GAC filter delivers reliable performance at flow rates up to 0.5 GPM and operating pressures between 35 and 100 PSI.
SPECIFICATIONS
Technical Details
| Model Number | QGA-25002 |
| Filter Dimensions | 12 inches length |
| Media Type | Granular Activated Carbon (GAC) |
| Flow Rate | 0.5 GPM |
| Operating Pressure | 35 - 100 PSI |
| Primary Contaminants Removed | Chlorine, organic chemicals, taste and odor |
| Manufacturer | Puregen |
INSTALLATION & USE
Setup Instructions
- Shut off water supply and relieve system pressure before removing the old filter cartridge.
- Insert the Puregen QGA-25002 into a compatible 12-inch standard filter housing, ensuring proper alignment and seal.
- Hand-tighten the housing sump, turn on water supply slowly, and check for leaks around the housing O-ring.
- Flush the new GAC filter for 3-5 minutes to remove carbon fines and activate the media before normal use.
- Replace the cartridge every 6-12 months depending on water quality and usage volume.
COMPATIBILITY
Housing Requirements
The Puregen QGA-25002 fits standard 12-inch filter housings with 2.5-inch diameter cartridge capacity. This GAC filter is commonly used in whole-house filtration systems, point-of-use applications, and pre-filtration stages for reverse osmosis systems. Verify your housing accepts standard 12-inch cartridges before ordering.
🔧 Pro tip: Always flush GAC filters thoroughly after installation. Carbon fines are normal and harmless but will cloud your water if not flushed out. Run water through the filter for at least 5 minutes before connecting it to appliances or drinking water lines.
$14.00
Original: $40.00
-65%Puregen (QGA-25002) 12" PROQ GAC Filter—
$40.00
$14.00Description
The Puregen QGA-25002 is a 12-inch granular activated carbon filter designed to remove chlorine, taste, odor, and organic chemicals from your water supply. Built with high-quality activated carbon media, this GAC filter delivers reliable performance at flow rates up to 0.5 GPM and operating pressures between 35 and 100 PSI.
SPECIFICATIONS
Technical Details
| Model Number | QGA-25002 |
| Filter Dimensions | 12 inches length |
| Media Type | Granular Activated Carbon (GAC) |
| Flow Rate | 0.5 GPM |
| Operating Pressure | 35 - 100 PSI |
| Primary Contaminants Removed | Chlorine, organic chemicals, taste and odor |
| Manufacturer | Puregen |
INSTALLATION & USE
Setup Instructions
- Shut off water supply and relieve system pressure before removing the old filter cartridge.
- Insert the Puregen QGA-25002 into a compatible 12-inch standard filter housing, ensuring proper alignment and seal.
- Hand-tighten the housing sump, turn on water supply slowly, and check for leaks around the housing O-ring.
- Flush the new GAC filter for 3-5 minutes to remove carbon fines and activate the media before normal use.
- Replace the cartridge every 6-12 months depending on water quality and usage volume.
COMPATIBILITY
Housing Requirements
The Puregen QGA-25002 fits standard 12-inch filter housings with 2.5-inch diameter cartridge capacity. This GAC filter is commonly used in whole-house filtration systems, point-of-use applications, and pre-filtration stages for reverse osmosis systems. Verify your housing accepts standard 12-inch cartridges before ordering.
🔧 Pro tip: Always flush GAC filters thoroughly after installation. Carbon fines are normal and harmless but will cloud your water if not flushed out. Run water through the filter for at least 5 minutes before connecting it to appliances or drinking water lines.
