HomeStore

PureT - HYD-SW-5 - Hydrotech/Clack Microline Compatible 5 Micron Sediment Filter

Product image 1

PureT - HYD-SW-5 - Hydrotech/Clack Microline Compatible 5 Micron Sediment Filter

The PureT HYD-SW-5 is a direct-fit 5 micron meltblown sediment filter engineered for Hydrotech and Clack Microline reverse osmosis systems. This first-stage prefilter captures dirt, rust, and sediment down to 5 microns, protecting downstream membranes and extending system life across residential and whole-house applications.
SPECIFICATIONS

Filter Details

Model Number HYD-SW-5
Filtration Rating 5 micron
Filter Media Meltblown polypropylene
Application Sediment pre-filtration
Compatibility Hydrotech, Clack Microline systems
Replacement Interval Every 6 months or as needed
Removes Sediment, dirt, rust, particulate
Stage Position First stage / pre-filter
INSTALLATION & USE

Replacement Procedure

  1. Shut off water supply to the RO system and relieve system pressure by opening the faucet
  2. Remove the filter housing and discard the old sediment cartridge
  3. Insert the new HYD-SW-5 filter into the housing, ensuring proper seating and o-ring placement
  4. Reinstall the housing, turn on water supply, and check for leaks before returning system to service
COMPATIBILITY

Compatible Systems

The HYD-SW-5 is a drop-in replacement for Hydrotech 1240 Series, E, M, and Pro Systems, as well as HT101, HT102, HT103, and HT123 models. This filter also fits Clack Microline units and cross-references with multiple OEM part numbers: Arrowhead Puritap 41400008, Hydrotech 41400008, Pentek 255822-43, Sierra Springs 41400008, and US Pure Water Products 41400008. Verify your housing configuration before ordering to ensure proper fit.

🔧 Pro tip: Mark your calendar for replacement dates when you install this filter. Sediment load varies widely by source water quality, so if you notice pressure drop or slower flow before the 6-month mark, replace early to protect your membrane investment.
The PureT HYD-SW-5 is a direct-fit 5 micron meltblown sediment filter engineered for Hydrotech and Clack Microline reverse osmosis systems. This first-stage prefilter captures dirt, rust, and sediment down to 5 microns, protecting downstream membranes and extending system life across residential and whole-house applications.
SPECIFICATIONS

Filter Details

Model Number HYD-SW-5
Filtration Rating 5 micron
Filter Media Meltblown polypropylene
Application Sediment pre-filtration
Compatibility Hydrotech, Clack Microline systems
Replacement Interval Every 6 months or as needed
Removes Sediment, dirt, rust, particulate
Stage Position First stage / pre-filter
INSTALLATION & USE

Replacement Procedure

  1. Shut off water supply to the RO system and relieve system pressure by opening the faucet
  2. Remove the filter housing and discard the old sediment cartridge
  3. Insert the new HYD-SW-5 filter into the housing, ensuring proper seating and o-ring placement
  4. Reinstall the housing, turn on water supply, and check for leaks before returning system to service
COMPATIBILITY

Compatible Systems

The HYD-SW-5 is a drop-in replacement for Hydrotech 1240 Series, E, M, and Pro Systems, as well as HT101, HT102, HT103, and HT123 models. This filter also fits Clack Microline units and cross-references with multiple OEM part numbers: Arrowhead Puritap 41400008, Hydrotech 41400008, Pentek 255822-43, Sierra Springs 41400008, and US Pure Water Products 41400008. Verify your housing configuration before ordering to ensure proper fit.

🔧 Pro tip: Mark your calendar for replacement dates when you install this filter. Sediment load varies widely by source water quality, so if you notice pressure drop or slower flow before the 6-month mark, replace early to protect your membrane investment.
$4.25
PureT - HYD-SW-5 - Hydrotech/Clack Microline Compatible 5 Micron Sediment Filter—
$4.25

Description

The PureT HYD-SW-5 is a direct-fit 5 micron meltblown sediment filter engineered for Hydrotech and Clack Microline reverse osmosis systems. This first-stage prefilter captures dirt, rust, and sediment down to 5 microns, protecting downstream membranes and extending system life across residential and whole-house applications.
SPECIFICATIONS

Filter Details

Model Number HYD-SW-5
Filtration Rating 5 micron
Filter Media Meltblown polypropylene
Application Sediment pre-filtration
Compatibility Hydrotech, Clack Microline systems
Replacement Interval Every 6 months or as needed
Removes Sediment, dirt, rust, particulate
Stage Position First stage / pre-filter
INSTALLATION & USE

Replacement Procedure

  1. Shut off water supply to the RO system and relieve system pressure by opening the faucet
  2. Remove the filter housing and discard the old sediment cartridge
  3. Insert the new HYD-SW-5 filter into the housing, ensuring proper seating and o-ring placement
  4. Reinstall the housing, turn on water supply, and check for leaks before returning system to service
COMPATIBILITY

Compatible Systems

The HYD-SW-5 is a drop-in replacement for Hydrotech 1240 Series, E, M, and Pro Systems, as well as HT101, HT102, HT103, and HT123 models. This filter also fits Clack Microline units and cross-references with multiple OEM part numbers: Arrowhead Puritap 41400008, Hydrotech 41400008, Pentek 255822-43, Sierra Springs 41400008, and US Pure Water Products 41400008. Verify your housing configuration before ordering to ensure proper fit.

🔧 Pro tip: Mark your calendar for replacement dates when you install this filter. Sediment load varies widely by source water quality, so if you notice pressure drop or slower flow before the 6-month mark, replace early to protect your membrane investment.
PureT - HYD-SW-5 - Hydrotech/Clack Microline Compatible 5 Micron Sediment Filter | Isopure Water