PureT (MH-35BLK-EZ) Residential RO Membrane Housing w- 1-4" EZ Ports
Technical Details
| Model Number | MH-35BLK-EZ |
| Manufacturer | PureT |
| Housing Type | RO Membrane Housing |
| Membrane Compatibility | 1.8" x 12" (1812 standard) |
| Port Configuration | 1/4" EZ quick-connect |
| Cap Design | Ribbed acme square threads with dual O-rings |
| Material | One-piece injection molded (no solvents or glues) |
| Application | Residential reverse osmosis systems |
How to Install the MH-35BLK-EZ Housing
- Shut off water supply and relieve system pressure before removing existing housing
- Insert your 1812 RO membrane into the housing, ensuring the brine seal is properly seated against the cap end
- Hand-tighten the ribbed cap clockwise until both O-rings are fully compressed and the housing is sealed
- Push 1/4" tubing firmly into EZ quick-connect ports until you feel resistance, then tug gently to confirm connection
- Slowly restore water pressure and inspect all connections for leaks before returning system to service
Works With These Systems
The PureT MH-35BLK-EZ accepts any standard 1812 reverse osmosis membrane (1.8" diameter x 12" length) from manufacturers like Filmtec, CSM, Hydranautics, and Vontron. The 1/4" EZ quick-connect ports are compatible with standard 1/4" OD polyethylene or nylon tubing used in most residential RO systems. This housing replaces traditional NPT-threaded housings in systems where quick-connect fittings simplify plumbing and reduce potential leak points.
Technical Details
| Model Number | MH-35BLK-EZ |
| Manufacturer | PureT |
| Housing Type | RO Membrane Housing |
| Membrane Compatibility | 1.8" x 12" (1812 standard) |
| Port Configuration | 1/4" EZ quick-connect |
| Cap Design | Ribbed acme square threads with dual O-rings |
| Material | One-piece injection molded (no solvents or glues) |
| Application | Residential reverse osmosis systems |
How to Install the MH-35BLK-EZ Housing
- Shut off water supply and relieve system pressure before removing existing housing
- Insert your 1812 RO membrane into the housing, ensuring the brine seal is properly seated against the cap end
- Hand-tighten the ribbed cap clockwise until both O-rings are fully compressed and the housing is sealed
- Push 1/4" tubing firmly into EZ quick-connect ports until you feel resistance, then tug gently to confirm connection
- Slowly restore water pressure and inspect all connections for leaks before returning system to service
Works With These Systems
The PureT MH-35BLK-EZ accepts any standard 1812 reverse osmosis membrane (1.8" diameter x 12" length) from manufacturers like Filmtec, CSM, Hydranautics, and Vontron. The 1/4" EZ quick-connect ports are compatible with standard 1/4" OD polyethylene or nylon tubing used in most residential RO systems. This housing replaces traditional NPT-threaded housings in systems where quick-connect fittings simplify plumbing and reduce potential leak points.
Original: $11.25
-65%$11.25
$3.94Description
Technical Details
| Model Number | MH-35BLK-EZ |
| Manufacturer | PureT |
| Housing Type | RO Membrane Housing |
| Membrane Compatibility | 1.8" x 12" (1812 standard) |
| Port Configuration | 1/4" EZ quick-connect |
| Cap Design | Ribbed acme square threads with dual O-rings |
| Material | One-piece injection molded (no solvents or glues) |
| Application | Residential reverse osmosis systems |
How to Install the MH-35BLK-EZ Housing
- Shut off water supply and relieve system pressure before removing existing housing
- Insert your 1812 RO membrane into the housing, ensuring the brine seal is properly seated against the cap end
- Hand-tighten the ribbed cap clockwise until both O-rings are fully compressed and the housing is sealed
- Push 1/4" tubing firmly into EZ quick-connect ports until you feel resistance, then tug gently to confirm connection
- Slowly restore water pressure and inspect all connections for leaks before returning system to service
Works With These Systems
The PureT MH-35BLK-EZ accepts any standard 1812 reverse osmosis membrane (1.8" diameter x 12" length) from manufacturers like Filmtec, CSM, Hydranautics, and Vontron. The 1/4" EZ quick-connect ports are compatible with standard 1/4" OD polyethylene or nylon tubing used in most residential RO systems. This housing replaces traditional NPT-threaded housings in systems where quick-connect fittings simplify plumbing and reduce potential leak points.
