Watts-FPP-0.2-30-222 Flowmax HP 222 Pleated Filter 0.2 Micron 30"
30" Pleated Sediment Filter 0.2 Micron
Engineered for demanding water quality standards
0.2 Micron Precision
Fixed pore construction removes particles down to 0.2 micron, meeting high-purity and food/beverage processing standards without compromise
Greater Surface Area
Pleated polypropylene media offers significantly more filtration surface than wound or spun alternatives, increasing dirt capacity and filter life
High Flow, Low Drop
100% polypropylene construction delivers strong flow rates with minimal pressure differential, ideal for whole-house or commercial pre-RO applications
FDA Food Contact
All materials comply with FDA 174.5, 177.1520, and 177.1630 for direct contact with potable water, food, and beverage production systems
Thermal Range
Rated for temperatures from 40°F to 175°F with maximum collapse differential of 130 psid and suggested changeout at 35 psid
Designed for Flowmax filter housings
The Watts FPP-0.2-30-222 uses proprietary 222 flat end caps for secure fitment in Flowmax HP series housings. The 30-inch length and 2.5-inch diameter are specific to Watts commercial and high-capacity residential filter systems requiring sub-micron pleated cartridges. Verify housing compatibility before ordering.
Replace based on pressure differential
Differential Gauge
Replace filter when pressure drop reaches 35 psid or flow rate noticeably decreases, whichever comes first
Typical Service Life
Service interval depends on sediment load and flow volume. High-turbidity water may require more frequent changeouts
Visual Check
Check housing O-rings and filter seating during quarterly inspections to prevent bypass or housing leaks
Commercial Grade
Built for food processing, beverage production, and high-purity lab applications
Extended Service Life
High dirt-holding capacity reduces replacement frequency and operating costs
Proven Reliability
Watts Flowmax HP series filters are trusted in demanding commercial water systems
NSF Compliant Materials
FDA-approved polypropylene safe for potable water and direct food contact
30" Pleated Sediment Filter 0.2 Micron
Engineered for demanding water quality standards
0.2 Micron Precision
Fixed pore construction removes particles down to 0.2 micron, meeting high-purity and food/beverage processing standards without compromise
Greater Surface Area
Pleated polypropylene media offers significantly more filtration surface than wound or spun alternatives, increasing dirt capacity and filter life
High Flow, Low Drop
100% polypropylene construction delivers strong flow rates with minimal pressure differential, ideal for whole-house or commercial pre-RO applications
FDA Food Contact
All materials comply with FDA 174.5, 177.1520, and 177.1630 for direct contact with potable water, food, and beverage production systems
Thermal Range
Rated for temperatures from 40°F to 175°F with maximum collapse differential of 130 psid and suggested changeout at 35 psid
Designed for Flowmax filter housings
The Watts FPP-0.2-30-222 uses proprietary 222 flat end caps for secure fitment in Flowmax HP series housings. The 30-inch length and 2.5-inch diameter are specific to Watts commercial and high-capacity residential filter systems requiring sub-micron pleated cartridges. Verify housing compatibility before ordering.
Replace based on pressure differential
Differential Gauge
Replace filter when pressure drop reaches 35 psid or flow rate noticeably decreases, whichever comes first
Typical Service Life
Service interval depends on sediment load and flow volume. High-turbidity water may require more frequent changeouts
Visual Check
Check housing O-rings and filter seating during quarterly inspections to prevent bypass or housing leaks
Commercial Grade
Built for food processing, beverage production, and high-purity lab applications
Extended Service Life
High dirt-holding capacity reduces replacement frequency and operating costs
Proven Reliability
Watts Flowmax HP series filters are trusted in demanding commercial water systems
NSF Compliant Materials
FDA-approved polypropylene safe for potable water and direct food contact
Original: $261.90
-65%$261.90
$91.66Description
30" Pleated Sediment Filter 0.2 Micron
Engineered for demanding water quality standards
0.2 Micron Precision
Fixed pore construction removes particles down to 0.2 micron, meeting high-purity and food/beverage processing standards without compromise
Greater Surface Area
Pleated polypropylene media offers significantly more filtration surface than wound or spun alternatives, increasing dirt capacity and filter life
High Flow, Low Drop
100% polypropylene construction delivers strong flow rates with minimal pressure differential, ideal for whole-house or commercial pre-RO applications
FDA Food Contact
All materials comply with FDA 174.5, 177.1520, and 177.1630 for direct contact with potable water, food, and beverage production systems
Thermal Range
Rated for temperatures from 40°F to 175°F with maximum collapse differential of 130 psid and suggested changeout at 35 psid
Designed for Flowmax filter housings
The Watts FPP-0.2-30-222 uses proprietary 222 flat end caps for secure fitment in Flowmax HP series housings. The 30-inch length and 2.5-inch diameter are specific to Watts commercial and high-capacity residential filter systems requiring sub-micron pleated cartridges. Verify housing compatibility before ordering.
Replace based on pressure differential
Differential Gauge
Replace filter when pressure drop reaches 35 psid or flow rate noticeably decreases, whichever comes first
Typical Service Life
Service interval depends on sediment load and flow volume. High-turbidity water may require more frequent changeouts
Visual Check
Check housing O-rings and filter seating during quarterly inspections to prevent bypass or housing leaks
Commercial Grade
Built for food processing, beverage production, and high-purity lab applications
Extended Service Life
High dirt-holding capacity reduces replacement frequency and operating costs
Proven Reliability
Watts Flowmax HP series filters are trusted in demanding commercial water systems
NSF Compliant Materials
FDA-approved polypropylene safe for potable water and direct food contact
