Watts-FPP-0.2-30-DOE Flowmax HP DOE Pleated Filter 0.2 Micron 30"
Flowmax HP DOE Pleated Filter 0.2 Micron 30"
High-efficiency pleated sediment filtration for whole-house and reverse osmosis systems demanding exceptional clarity and flow. 100% polypropylene construction with FDA-compliant materials for food and beverage applications.
Engineered for high-purity applications
Submicron Pleated Media
0.2 micron rated polypropylene pleats capture fine sediment, bacteria, and particulates that wound or spun filters miss. Greater surface area means longer life and lower pressure drop.
High Flow, Low Drop
30-inch length with optimized pleat geometry delivers high flow rates while maintaining low pressure differential. Maximum collapse resistance rated to 130 psid.
Food Grade Compliant
All materials comply with FDA regulations 174.5, 177.1520, and 177.1630 for direct contact with food and beverage processing streams.
Thermal Stability
Rated for continuous operation from 40°F to 175°F. Fixed pore construction maintains filtration performance across the entire temperature range without media migration.
Watts-FPP-0.2-30-DOE
| Filtration Rating | 0.2 micron nominal |
| Dimensions | 30" x 2.5" |
| End Cap Type | DOE (Double Open End) |
| Media | 100% polypropylene pleated |
| Temperature Range | 40°F to 175°F (4.4°C to 79.4°C) |
| Max Collapse Pressure | 130 psid (8.9 bar) |
| Change-Out Differential | 35 psid (2.4 bar) suggested |
Designed for Flowmax housings
This Watts Flowmax HP filter is engineered specifically for Flowmax filter housings that accept 30-inch cartridges with DOE end caps. Compatible with whole-house sediment filtration systems, reverse osmosis pre-filtration stages, and high-purity water applications requiring submicron filtration. Verify housing compatibility and pressure ratings before installation.
Replace when differential reaches 35 psid
Heavy Sediment
Well water, high turbidity, or industrial applications with heavy particulate loading
Moderate Use
Municipal pre-treatment or whole-house filtration with typical sediment levels
Low Sediment
Pre-filtered municipal water or polishing applications with minimal particulate load
Extended Service Life
Pleated construction offers far greater dirt-holding capacity than wound or spun cartridges
Drop-In Replacement
DOE end caps fit standard Flowmax 30-inch housings without modification
FDA Materials
All wetted materials comply with federal food contact regulations
Flowmax HP DOE Pleated Filter 0.2 Micron 30"
High-efficiency pleated sediment filtration for whole-house and reverse osmosis systems demanding exceptional clarity and flow. 100% polypropylene construction with FDA-compliant materials for food and beverage applications.
Engineered for high-purity applications
Submicron Pleated Media
0.2 micron rated polypropylene pleats capture fine sediment, bacteria, and particulates that wound or spun filters miss. Greater surface area means longer life and lower pressure drop.
High Flow, Low Drop
30-inch length with optimized pleat geometry delivers high flow rates while maintaining low pressure differential. Maximum collapse resistance rated to 130 psid.
Food Grade Compliant
All materials comply with FDA regulations 174.5, 177.1520, and 177.1630 for direct contact with food and beverage processing streams.
Thermal Stability
Rated for continuous operation from 40°F to 175°F. Fixed pore construction maintains filtration performance across the entire temperature range without media migration.
Watts-FPP-0.2-30-DOE
| Filtration Rating | 0.2 micron nominal |
| Dimensions | 30" x 2.5" |
| End Cap Type | DOE (Double Open End) |
| Media | 100% polypropylene pleated |
| Temperature Range | 40°F to 175°F (4.4°C to 79.4°C) |
| Max Collapse Pressure | 130 psid (8.9 bar) |
| Change-Out Differential | 35 psid (2.4 bar) suggested |
Designed for Flowmax housings
This Watts Flowmax HP filter is engineered specifically for Flowmax filter housings that accept 30-inch cartridges with DOE end caps. Compatible with whole-house sediment filtration systems, reverse osmosis pre-filtration stages, and high-purity water applications requiring submicron filtration. Verify housing compatibility and pressure ratings before installation.
Replace when differential reaches 35 psid
Heavy Sediment
Well water, high turbidity, or industrial applications with heavy particulate loading
Moderate Use
Municipal pre-treatment or whole-house filtration with typical sediment levels
Low Sediment
Pre-filtered municipal water or polishing applications with minimal particulate load
Extended Service Life
Pleated construction offers far greater dirt-holding capacity than wound or spun cartridges
Drop-In Replacement
DOE end caps fit standard Flowmax 30-inch housings without modification
FDA Materials
All wetted materials comply with federal food contact regulations
Original: $261.90
-65%$261.90
$91.66Description
Flowmax HP DOE Pleated Filter 0.2 Micron 30"
High-efficiency pleated sediment filtration for whole-house and reverse osmosis systems demanding exceptional clarity and flow. 100% polypropylene construction with FDA-compliant materials for food and beverage applications.
Engineered for high-purity applications
Submicron Pleated Media
0.2 micron rated polypropylene pleats capture fine sediment, bacteria, and particulates that wound or spun filters miss. Greater surface area means longer life and lower pressure drop.
High Flow, Low Drop
30-inch length with optimized pleat geometry delivers high flow rates while maintaining low pressure differential. Maximum collapse resistance rated to 130 psid.
Food Grade Compliant
All materials comply with FDA regulations 174.5, 177.1520, and 177.1630 for direct contact with food and beverage processing streams.
Thermal Stability
Rated for continuous operation from 40°F to 175°F. Fixed pore construction maintains filtration performance across the entire temperature range without media migration.
Watts-FPP-0.2-30-DOE
| Filtration Rating | 0.2 micron nominal |
| Dimensions | 30" x 2.5" |
| End Cap Type | DOE (Double Open End) |
| Media | 100% polypropylene pleated |
| Temperature Range | 40°F to 175°F (4.4°C to 79.4°C) |
| Max Collapse Pressure | 130 psid (8.9 bar) |
| Change-Out Differential | 35 psid (2.4 bar) suggested |
Designed for Flowmax housings
This Watts Flowmax HP filter is engineered specifically for Flowmax filter housings that accept 30-inch cartridges with DOE end caps. Compatible with whole-house sediment filtration systems, reverse osmosis pre-filtration stages, and high-purity water applications requiring submicron filtration. Verify housing compatibility and pressure ratings before installation.
Replace when differential reaches 35 psid
Heavy Sediment
Well water, high turbidity, or industrial applications with heavy particulate loading
Moderate Use
Municipal pre-treatment or whole-house filtration with typical sediment levels
Low Sediment
Pre-filtered municipal water or polishing applications with minimal particulate load
Extended Service Life
Pleated construction offers far greater dirt-holding capacity than wound or spun cartridges
Drop-In Replacement
DOE end caps fit standard Flowmax 30-inch housings without modification
FDA Materials
All wetted materials comply with federal food contact regulations
