Aries (AF-10-3630) 9.75"x3" Perchlorate Removal; SIR-110-HP
Aries AF-10-3630 Technical Details
| Model Number | AF-10-3630 |
| Dimensions | 9.75" x 3" |
| Media Type | SIR-110-HP Selective Ion Resin |
| Target Contaminant | Perchlorate (ClO₄⁻) |
| Housing Compatibility | Standard 10" x 3" filter housings |
| Flow Rate | Up to 2.5 GPM (depends on water quality) |
| Service Life | Varies by perchlorate concentration and water volume |
| Manufacturer | Aries Filter Works |
How to Install the AF-10-3630
- Shut off water supply and relieve system pressure before opening your 10-inch standard filter housing.
- Remove old cartridge if applicable, clean housing sump with mild soap, and inspect o-ring for wear or damage.
- Insert the Aries AF-10-3630 cartridge vertically into the housing, ensuring it seats properly on the center post.
- Lubricate the o-ring with food-grade silicone grease, hand-tighten the housing, and slowly turn water back on to check for leaks.
- Flush the system for 3-5 minutes to remove any resin fines before use, monitoring pressure and flow.
Housing and System Requirements
The Aries AF-10-3630 fits any standard 10-inch filter housing designed for 3-inch diameter cartridges, including models from Pentek, Culligan, Omni, and other major brands. Use this cartridge as a dedicated perchlorate removal stage in multi-stage systems or as a standalone filter where perchlorate contamination has been detected through water testing. The SIR-110-HP resin media is highly selective for perchlorate ions and works in both municipal chlorinated water and well water applications. For optimal performance, install after sediment pre-filtration to prevent fouling of the ion exchange resin.
Aries AF-10-3630 Technical Details
| Model Number | AF-10-3630 |
| Dimensions | 9.75" x 3" |
| Media Type | SIR-110-HP Selective Ion Resin |
| Target Contaminant | Perchlorate (ClO₄⁻) |
| Housing Compatibility | Standard 10" x 3" filter housings |
| Flow Rate | Up to 2.5 GPM (depends on water quality) |
| Service Life | Varies by perchlorate concentration and water volume |
| Manufacturer | Aries Filter Works |
How to Install the AF-10-3630
- Shut off water supply and relieve system pressure before opening your 10-inch standard filter housing.
- Remove old cartridge if applicable, clean housing sump with mild soap, and inspect o-ring for wear or damage.
- Insert the Aries AF-10-3630 cartridge vertically into the housing, ensuring it seats properly on the center post.
- Lubricate the o-ring with food-grade silicone grease, hand-tighten the housing, and slowly turn water back on to check for leaks.
- Flush the system for 3-5 minutes to remove any resin fines before use, monitoring pressure and flow.
Housing and System Requirements
The Aries AF-10-3630 fits any standard 10-inch filter housing designed for 3-inch diameter cartridges, including models from Pentek, Culligan, Omni, and other major brands. Use this cartridge as a dedicated perchlorate removal stage in multi-stage systems or as a standalone filter where perchlorate contamination has been detected through water testing. The SIR-110-HP resin media is highly selective for perchlorate ions and works in both municipal chlorinated water and well water applications. For optimal performance, install after sediment pre-filtration to prevent fouling of the ion exchange resin.
Original: $77.21
-65%$77.21
$27.02Description
Aries AF-10-3630 Technical Details
| Model Number | AF-10-3630 |
| Dimensions | 9.75" x 3" |
| Media Type | SIR-110-HP Selective Ion Resin |
| Target Contaminant | Perchlorate (ClO₄⁻) |
| Housing Compatibility | Standard 10" x 3" filter housings |
| Flow Rate | Up to 2.5 GPM (depends on water quality) |
| Service Life | Varies by perchlorate concentration and water volume |
| Manufacturer | Aries Filter Works |
How to Install the AF-10-3630
- Shut off water supply and relieve system pressure before opening your 10-inch standard filter housing.
- Remove old cartridge if applicable, clean housing sump with mild soap, and inspect o-ring for wear or damage.
- Insert the Aries AF-10-3630 cartridge vertically into the housing, ensuring it seats properly on the center post.
- Lubricate the o-ring with food-grade silicone grease, hand-tighten the housing, and slowly turn water back on to check for leaks.
- Flush the system for 3-5 minutes to remove any resin fines before use, monitoring pressure and flow.
Housing and System Requirements
The Aries AF-10-3630 fits any standard 10-inch filter housing designed for 3-inch diameter cartridges, including models from Pentek, Culligan, Omni, and other major brands. Use this cartridge as a dedicated perchlorate removal stage in multi-stage systems or as a standalone filter where perchlorate contamination has been detected through water testing. The SIR-110-HP resin media is highly selective for perchlorate ions and works in both municipal chlorinated water and well water applications. For optimal performance, install after sediment pre-filtration to prevent fouling of the ion exchange resin.
