Compatible to Intelifil (IF-SM-CG010) 9.75"x2.75" Catalytic Carbon Hydrogen Sulfide Removal Filter by IPW Industries Inc
Catalytic Carbon Filter Technical Data
| Dimensions | 9.75" x 2.75" |
| Micron Rating | 10 Nominal |
| Filter Media | Catalytic Granular Activated Carbon |
| Filter Life | 1,500 Gallons |
| Flow Rate | 0.1 GPM Maximum |
| Temperature Range | 40°F to 100°F |
| Weight | 1 lb 4 oz |
| Compatible With | Intelifil IF-SM-CG010, Watts housings, standard 10" filter systems |
Setup Requirements
- Pre-wet the catalytic carbon media by submerging the cartridge in clean water for at least 12 hours before installation. This activates the carbon and removes fine particles.
- Test influent water for dissolved oxygen content. If below 4 mg/L, install an air injector upstream to ensure proper hydrogen sulfide oxidation.
- Insert the filter into a compatible 10-inch standard filter housing with O-ring seals. Flush system for 5 minutes to purge carbon fines before use.
- Replace cartridge every 1,500 gallons or when hydrogen sulfide odor returns, whichever comes first.
Applications & Housing Fit
This filter is a direct replacement for the Intelifil IF-SM-CG010 and fits all standard 10-inch x 2.5-inch filter housings from Watts, Pentair, Culligan, and other manufacturers. Suitable for whole-house applications targeting hydrogen sulfide removal, reverse osmosis pre-filtration where chloramines are present, and specialty point-of-use systems requiring VOC and pesticide reduction. The catalytic carbon media outperforms standard GAC in hydrogen peroxide and chloramine environments where conventional carbon fails to adequately reduce contaminants.
Catalytic Carbon Filter Technical Data
| Dimensions | 9.75" x 2.75" |
| Micron Rating | 10 Nominal |
| Filter Media | Catalytic Granular Activated Carbon |
| Filter Life | 1,500 Gallons |
| Flow Rate | 0.1 GPM Maximum |
| Temperature Range | 40°F to 100°F |
| Weight | 1 lb 4 oz |
| Compatible With | Intelifil IF-SM-CG010, Watts housings, standard 10" filter systems |
Setup Requirements
- Pre-wet the catalytic carbon media by submerging the cartridge in clean water for at least 12 hours before installation. This activates the carbon and removes fine particles.
- Test influent water for dissolved oxygen content. If below 4 mg/L, install an air injector upstream to ensure proper hydrogen sulfide oxidation.
- Insert the filter into a compatible 10-inch standard filter housing with O-ring seals. Flush system for 5 minutes to purge carbon fines before use.
- Replace cartridge every 1,500 gallons or when hydrogen sulfide odor returns, whichever comes first.
Applications & Housing Fit
This filter is a direct replacement for the Intelifil IF-SM-CG010 and fits all standard 10-inch x 2.5-inch filter housings from Watts, Pentair, Culligan, and other manufacturers. Suitable for whole-house applications targeting hydrogen sulfide removal, reverse osmosis pre-filtration where chloramines are present, and specialty point-of-use systems requiring VOC and pesticide reduction. The catalytic carbon media outperforms standard GAC in hydrogen peroxide and chloramine environments where conventional carbon fails to adequately reduce contaminants.
Original: $24.30
-65%$24.30
$8.50Description
Catalytic Carbon Filter Technical Data
| Dimensions | 9.75" x 2.75" |
| Micron Rating | 10 Nominal |
| Filter Media | Catalytic Granular Activated Carbon |
| Filter Life | 1,500 Gallons |
| Flow Rate | 0.1 GPM Maximum |
| Temperature Range | 40°F to 100°F |
| Weight | 1 lb 4 oz |
| Compatible With | Intelifil IF-SM-CG010, Watts housings, standard 10" filter systems |
Setup Requirements
- Pre-wet the catalytic carbon media by submerging the cartridge in clean water for at least 12 hours before installation. This activates the carbon and removes fine particles.
- Test influent water for dissolved oxygen content. If below 4 mg/L, install an air injector upstream to ensure proper hydrogen sulfide oxidation.
- Insert the filter into a compatible 10-inch standard filter housing with O-ring seals. Flush system for 5 minutes to purge carbon fines before use.
- Replace cartridge every 1,500 gallons or when hydrogen sulfide odor returns, whichever comes first.
Applications & Housing Fit
This filter is a direct replacement for the Intelifil IF-SM-CG010 and fits all standard 10-inch x 2.5-inch filter housings from Watts, Pentair, Culligan, and other manufacturers. Suitable for whole-house applications targeting hydrogen sulfide removal, reverse osmosis pre-filtration where chloramines are present, and specialty point-of-use systems requiring VOC and pesticide reduction. The catalytic carbon media outperforms standard GAC in hydrogen peroxide and chloramine environments where conventional carbon fails to adequately reduce contaminants.
