HomeStore

Myron L (T2-PH) 0-50, 500, 5000 PPM; 2-12 PH

Product image 1

Myron L (T2-PH) 0-50, 500, 5000 PPM; 2-12 PH

The Myron L T2-PH is a dual-function meter designed to measure both TDS (0-50, 500, 5000 ppm ranges) and pH (2-12 range) in a single compact unit. Built specifically for testing point-of-use reverse osmosis and distillation systems, it delivers before-and-after performance verification in seconds.
SPECIFICATIONS

Myron L T2-PH Meter Technical Details

Model Number T2-PH
TDS Measurement Ranges 0-50 ppm, 0-500 ppm, 0-5000 ppm
pH Measurement Range 2-12 pH
Measurement Method Electrical conductivity (TDS) and pH sensor
Primary Application RO and distillation system testing
Design Compact handheld unit
Best For Membrane evaluation, system diagnostics, pre/post filtration comparison
Manufacturer Myron L Company
INSTALLATION & USE

How to Test Your Water System

  1. Collect a sample of untreated source water in a clean container before it enters your RO or distillation system
  2. Rinse the T2-PH sensor in the sample, then take readings on both the TDS and pH scales to establish baseline water quality
  3. Collect a second sample from the treated water outlet after filtration or distillation is complete
  4. Measure the treated sample using the same TDS and pH functions to compare results and verify system performance
  5. Record readings regularly to track membrane condition and determine when replacement or maintenance is needed
COMPATIBILITY

System Applications

The Myron L T2-PH works with all point-of-use reverse osmosis systems, countertop and freestanding distillers, and any residential or light commercial water treatment setup where TDS and pH monitoring is required. This meter is ideal for dealers and service technicians running membrane evaluation programs, homeowners verifying system performance after installation, and anyone conducting routine quality checks on treated drinking water. The triple TDS range selection allows testing of everything from ultra-pure distilled water to heavily mineralized well water without switching instruments.

🔧 Pro Tip: Test your RO system's product water at three different times—immediately after membrane replacement, at the 6-month mark, and just before the next scheduled change. A gradual TDS increase over time is normal, but a sudden jump indicates membrane failure or a loose connection in the system.
The Myron L T2-PH is a dual-function meter designed to measure both TDS (0-50, 500, 5000 ppm ranges) and pH (2-12 range) in a single compact unit. Built specifically for testing point-of-use reverse osmosis and distillation systems, it delivers before-and-after performance verification in seconds.
SPECIFICATIONS

Myron L T2-PH Meter Technical Details

Model Number T2-PH
TDS Measurement Ranges 0-50 ppm, 0-500 ppm, 0-5000 ppm
pH Measurement Range 2-12 pH
Measurement Method Electrical conductivity (TDS) and pH sensor
Primary Application RO and distillation system testing
Design Compact handheld unit
Best For Membrane evaluation, system diagnostics, pre/post filtration comparison
Manufacturer Myron L Company
INSTALLATION & USE

How to Test Your Water System

  1. Collect a sample of untreated source water in a clean container before it enters your RO or distillation system
  2. Rinse the T2-PH sensor in the sample, then take readings on both the TDS and pH scales to establish baseline water quality
  3. Collect a second sample from the treated water outlet after filtration or distillation is complete
  4. Measure the treated sample using the same TDS and pH functions to compare results and verify system performance
  5. Record readings regularly to track membrane condition and determine when replacement or maintenance is needed
COMPATIBILITY

System Applications

The Myron L T2-PH works with all point-of-use reverse osmosis systems, countertop and freestanding distillers, and any residential or light commercial water treatment setup where TDS and pH monitoring is required. This meter is ideal for dealers and service technicians running membrane evaluation programs, homeowners verifying system performance after installation, and anyone conducting routine quality checks on treated drinking water. The triple TDS range selection allows testing of everything from ultra-pure distilled water to heavily mineralized well water without switching instruments.

🔧 Pro Tip: Test your RO system's product water at three different times—immediately after membrane replacement, at the 6-month mark, and just before the next scheduled change. A gradual TDS increase over time is normal, but a sudden jump indicates membrane failure or a loose connection in the system.
$285.57

Original: $815.91

-65%
Myron L (T2-PH) 0-50, 500, 5000 PPM; 2-12 PH—

$815.91

$285.57

Description

The Myron L T2-PH is a dual-function meter designed to measure both TDS (0-50, 500, 5000 ppm ranges) and pH (2-12 range) in a single compact unit. Built specifically for testing point-of-use reverse osmosis and distillation systems, it delivers before-and-after performance verification in seconds.
SPECIFICATIONS

Myron L T2-PH Meter Technical Details

Model Number T2-PH
TDS Measurement Ranges 0-50 ppm, 0-500 ppm, 0-5000 ppm
pH Measurement Range 2-12 pH
Measurement Method Electrical conductivity (TDS) and pH sensor
Primary Application RO and distillation system testing
Design Compact handheld unit
Best For Membrane evaluation, system diagnostics, pre/post filtration comparison
Manufacturer Myron L Company
INSTALLATION & USE

How to Test Your Water System

  1. Collect a sample of untreated source water in a clean container before it enters your RO or distillation system
  2. Rinse the T2-PH sensor in the sample, then take readings on both the TDS and pH scales to establish baseline water quality
  3. Collect a second sample from the treated water outlet after filtration or distillation is complete
  4. Measure the treated sample using the same TDS and pH functions to compare results and verify system performance
  5. Record readings regularly to track membrane condition and determine when replacement or maintenance is needed
COMPATIBILITY

System Applications

The Myron L T2-PH works with all point-of-use reverse osmosis systems, countertop and freestanding distillers, and any residential or light commercial water treatment setup where TDS and pH monitoring is required. This meter is ideal for dealers and service technicians running membrane evaluation programs, homeowners verifying system performance after installation, and anyone conducting routine quality checks on treated drinking water. The triple TDS range selection allows testing of everything from ultra-pure distilled water to heavily mineralized well water without switching instruments.

🔧 Pro Tip: Test your RO system's product water at three different times—immediately after membrane replacement, at the 6-month mark, and just before the next scheduled change. A gradual TDS increase over time is normal, but a sudden jump indicates membrane failure or a loose connection in the system.