HomeStore

Pentek - PO.2-10E 10" x 2.5" High-Efficiency Pleated Polypropylene DOE 0.2 Micron Filter

Product image 1

Pentek - PO.2-10E 10" x 2.5" High-Efficiency Pleated Polypropylene DOE 0.2 Micron Filter

The Pentek PO.2-10E delivers 0.2 micron absolute filtration through high-efficiency pleated polypropylene construction, engineered for demanding pharmaceutical, semiconductor, and food-grade applications. With gradient density microfiber media and all-FDA-compliant materials, this 10" x 2.5" DOE cartridge provides superior contaminant holding capacity and flow rates up to 3 GPM.
SPECIFICATIONS

Pentek PO.2-10E Technical Details

Model Number PO.2-10E
Filter Media Pleated Polypropylene Microfiber
Micron Rating 0.2 Micron (Absolute)
Dimensions 10" Length x 2.5" Diameter
End Configuration Double Open End (DOE)
Flow Rate 2 to 3 GPM
Max Temperature 122°F (50°C)
Seal Type Buna N Gasket/O-Ring
INSTALLATION & USE

Installing Your Pentek PO.2-10E Filter

  1. Shut off water supply and relieve system pressure before opening your 10" standard housing.
  2. Remove old cartridge and clean housing interior with mild soap solution, ensuring all debris is cleared from the sump.
  3. Inspect Buna N O-ring for damage and lubricate lightly with food-grade silicone grease before installing new PO.2-10E cartridge.
  4. Hand-tighten housing sump until snug, then slowly restore water pressure and check for leaks around the seal.
  5. Replace cartridge when differential pressure reaches 25 psid or flow rate noticeably decreases, typically every 6-12 months depending on sediment load.
COMPATIBILITY

System Compatibility

The Pentek PO.2-10E fits all standard 10-inch filter housings with 2.5-inch sump diameter and Double Open End (DOE) cartridge configuration. Ideal as a pre-filter for reverse osmosis systems, post-filter for whole-house sediment filtration, or standalone filter for pharmaceutical and food-grade water processing. Compatible with Pentek, Culligan, GE, Watts, and other major brands using 10" x 2.5" DOE cartridge format. The all-polypropylene construction is safe for potable water and FDA-compliant for food contact applications.

🔧 Pro Tip: For optimal cartridge life and flow performance, always install the PO.2-10E downstream of a 5-micron sediment pre-filter. This extends the 0.2 micron cartridge's service life significantly by preventing premature loading with larger sediment particles, and helps you reach the full 25 psid differential pressure rating before replacement is needed.
The Pentek PO.2-10E delivers 0.2 micron absolute filtration through high-efficiency pleated polypropylene construction, engineered for demanding pharmaceutical, semiconductor, and food-grade applications. With gradient density microfiber media and all-FDA-compliant materials, this 10" x 2.5" DOE cartridge provides superior contaminant holding capacity and flow rates up to 3 GPM.
SPECIFICATIONS

Pentek PO.2-10E Technical Details

Model Number PO.2-10E
Filter Media Pleated Polypropylene Microfiber
Micron Rating 0.2 Micron (Absolute)
Dimensions 10" Length x 2.5" Diameter
End Configuration Double Open End (DOE)
Flow Rate 2 to 3 GPM
Max Temperature 122°F (50°C)
Seal Type Buna N Gasket/O-Ring
INSTALLATION & USE

Installing Your Pentek PO.2-10E Filter

  1. Shut off water supply and relieve system pressure before opening your 10" standard housing.
  2. Remove old cartridge and clean housing interior with mild soap solution, ensuring all debris is cleared from the sump.
  3. Inspect Buna N O-ring for damage and lubricate lightly with food-grade silicone grease before installing new PO.2-10E cartridge.
  4. Hand-tighten housing sump until snug, then slowly restore water pressure and check for leaks around the seal.
  5. Replace cartridge when differential pressure reaches 25 psid or flow rate noticeably decreases, typically every 6-12 months depending on sediment load.
COMPATIBILITY

System Compatibility

The Pentek PO.2-10E fits all standard 10-inch filter housings with 2.5-inch sump diameter and Double Open End (DOE) cartridge configuration. Ideal as a pre-filter for reverse osmosis systems, post-filter for whole-house sediment filtration, or standalone filter for pharmaceutical and food-grade water processing. Compatible with Pentek, Culligan, GE, Watts, and other major brands using 10" x 2.5" DOE cartridge format. The all-polypropylene construction is safe for potable water and FDA-compliant for food contact applications.

🔧 Pro Tip: For optimal cartridge life and flow performance, always install the PO.2-10E downstream of a 5-micron sediment pre-filter. This extends the 0.2 micron cartridge's service life significantly by preventing premature loading with larger sediment particles, and helps you reach the full 25 psid differential pressure rating before replacement is needed.
$78.02

Original: $222.92

-65%
Pentek - PO.2-10E 10" x 2.5" High-Efficiency Pleated Polypropylene DOE 0.2 Micron Filter—

$222.92

$78.02

Description

The Pentek PO.2-10E delivers 0.2 micron absolute filtration through high-efficiency pleated polypropylene construction, engineered for demanding pharmaceutical, semiconductor, and food-grade applications. With gradient density microfiber media and all-FDA-compliant materials, this 10" x 2.5" DOE cartridge provides superior contaminant holding capacity and flow rates up to 3 GPM.
SPECIFICATIONS

Pentek PO.2-10E Technical Details

Model Number PO.2-10E
Filter Media Pleated Polypropylene Microfiber
Micron Rating 0.2 Micron (Absolute)
Dimensions 10" Length x 2.5" Diameter
End Configuration Double Open End (DOE)
Flow Rate 2 to 3 GPM
Max Temperature 122°F (50°C)
Seal Type Buna N Gasket/O-Ring
INSTALLATION & USE

Installing Your Pentek PO.2-10E Filter

  1. Shut off water supply and relieve system pressure before opening your 10" standard housing.
  2. Remove old cartridge and clean housing interior with mild soap solution, ensuring all debris is cleared from the sump.
  3. Inspect Buna N O-ring for damage and lubricate lightly with food-grade silicone grease before installing new PO.2-10E cartridge.
  4. Hand-tighten housing sump until snug, then slowly restore water pressure and check for leaks around the seal.
  5. Replace cartridge when differential pressure reaches 25 psid or flow rate noticeably decreases, typically every 6-12 months depending on sediment load.
COMPATIBILITY

System Compatibility

The Pentek PO.2-10E fits all standard 10-inch filter housings with 2.5-inch sump diameter and Double Open End (DOE) cartridge configuration. Ideal as a pre-filter for reverse osmosis systems, post-filter for whole-house sediment filtration, or standalone filter for pharmaceutical and food-grade water processing. Compatible with Pentek, Culligan, GE, Watts, and other major brands using 10" x 2.5" DOE cartridge format. The all-polypropylene construction is safe for potable water and FDA-compliant for food contact applications.

🔧 Pro Tip: For optimal cartridge life and flow performance, always install the PO.2-10E downstream of a 5-micron sediment pre-filter. This extends the 0.2 micron cartridge's service life significantly by preventing premature loading with larger sediment particles, and helps you reach the full 25 psid differential pressure rating before replacement is needed.
Pentek - PO.2-10E 10" x 2.5" High-Efficiency Pleated Polypropylene DOE 0.2 Micron Filter | Isopure Water