PureT - HCB Series - 10" x 2.5" Grooved Spun Polypropylene Sediment Filter
10" x 2.5" Grooved Spun Polypropylene Sediment Filter
The PureT HCB Series cartridge is a 2.5" diameter x 9.78" length grooved sediment filter engineered for RO systems and standard 10-inch housings. Its four-layer spun polypropylene construction removes sand, silt, rust, and scale particles while maintaining consistent flow rates. Available in 1 micron and 5 micron ratings for municipal and well water sources.
Engineered for Performance and Longevity
Deep Groove Design
Increased surface area extends filter life and improves dirt-holding capacity compared to smooth-surface cartridges
4-Layer Structure
Nominal micron rating with graded density captures particles throughout the depth of the media, not just at the surface
Low Pressure Drop
Maintains system flow and efficiency even as sediment load increases over the filter's service life
Chemical Resistance
Pure polypropylene construction withstands chlorine, pH variations, and common water treatment chemicals
Versatile Application
Suitable for whole-house sediment filtration, RO pre-filtration, and municipal or well water sources
Standard 10" Fit
Fits all standard 10-inch filter housings with 2.5" diameter capacity, no modifications required
Direct Replacement for Major Brands
The PureT HCB Series is a cost-effective alternative to Culligan HF-150, HF-160, HF-360, and RO-2127; Cuno CFS11T and CFS01T; Aqua Pure AP101T, AP11T, AP141T, SST1, SST1HA, and AP1610SS; American Plumber W38-PRA, W38-PRB, W38-PRQC, W34-PR, WC34-PR, W34-PRB, WC34-PRB, and W34-PRM; Omni Filter OB1, OB5, RO2000, U24, and U25. Compatible with Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, and General Electric housings. Recommended replacement interval is every 6 months depending on sediment load and water quality.
PureT filters are manufactured in the USA with 100% pure polypropylene for consistent performance and reliable sediment reduction across residential and light commercial applications.
10" x 2.5" Grooved Spun Polypropylene Sediment Filter
The PureT HCB Series cartridge is a 2.5" diameter x 9.78" length grooved sediment filter engineered for RO systems and standard 10-inch housings. Its four-layer spun polypropylene construction removes sand, silt, rust, and scale particles while maintaining consistent flow rates. Available in 1 micron and 5 micron ratings for municipal and well water sources.
Engineered for Performance and Longevity
Deep Groove Design
Increased surface area extends filter life and improves dirt-holding capacity compared to smooth-surface cartridges
4-Layer Structure
Nominal micron rating with graded density captures particles throughout the depth of the media, not just at the surface
Low Pressure Drop
Maintains system flow and efficiency even as sediment load increases over the filter's service life
Chemical Resistance
Pure polypropylene construction withstands chlorine, pH variations, and common water treatment chemicals
Versatile Application
Suitable for whole-house sediment filtration, RO pre-filtration, and municipal or well water sources
Standard 10" Fit
Fits all standard 10-inch filter housings with 2.5" diameter capacity, no modifications required
Direct Replacement for Major Brands
The PureT HCB Series is a cost-effective alternative to Culligan HF-150, HF-160, HF-360, and RO-2127; Cuno CFS11T and CFS01T; Aqua Pure AP101T, AP11T, AP141T, SST1, SST1HA, and AP1610SS; American Plumber W38-PRA, W38-PRB, W38-PRQC, W34-PR, WC34-PR, W34-PRB, WC34-PRB, and W34-PRM; Omni Filter OB1, OB5, RO2000, U24, and U25. Compatible with Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, and General Electric housings. Recommended replacement interval is every 6 months depending on sediment load and water quality.
PureT filters are manufactured in the USA with 100% pure polypropylene for consistent performance and reliable sediment reduction across residential and light commercial applications.
Description
10" x 2.5" Grooved Spun Polypropylene Sediment Filter
The PureT HCB Series cartridge is a 2.5" diameter x 9.78" length grooved sediment filter engineered for RO systems and standard 10-inch housings. Its four-layer spun polypropylene construction removes sand, silt, rust, and scale particles while maintaining consistent flow rates. Available in 1 micron and 5 micron ratings for municipal and well water sources.
Engineered for Performance and Longevity
Deep Groove Design
Increased surface area extends filter life and improves dirt-holding capacity compared to smooth-surface cartridges
4-Layer Structure
Nominal micron rating with graded density captures particles throughout the depth of the media, not just at the surface
Low Pressure Drop
Maintains system flow and efficiency even as sediment load increases over the filter's service life
Chemical Resistance
Pure polypropylene construction withstands chlorine, pH variations, and common water treatment chemicals
Versatile Application
Suitable for whole-house sediment filtration, RO pre-filtration, and municipal or well water sources
Standard 10" Fit
Fits all standard 10-inch filter housings with 2.5" diameter capacity, no modifications required
Direct Replacement for Major Brands
The PureT HCB Series is a cost-effective alternative to Culligan HF-150, HF-160, HF-360, and RO-2127; Cuno CFS11T and CFS01T; Aqua Pure AP101T, AP11T, AP141T, SST1, SST1HA, and AP1610SS; American Plumber W38-PRA, W38-PRB, W38-PRQC, W34-PR, WC34-PR, W34-PRB, WC34-PRB, and W34-PRM; Omni Filter OB1, OB5, RO2000, U24, and U25. Compatible with Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, and General Electric housings. Recommended replacement interval is every 6 months depending on sediment load and water quality.
PureT filters are manufactured in the USA with 100% pure polypropylene for consistent performance and reliable sediment reduction across residential and light commercial applications.
