
IPW Industries Inc 20" x 4.5" Big Blue CTO Carbon Block & Sediment Replacement Filter Cartridges Combo Set | Whole House Filters 5 Micron
Filter Set Details
| Dimensions | 20" x 4.5" each cartridge |
| Micron Rating | 5 micron (both filters) |
| Carbon Block Capacity | Up to 20,000 gallons |
| Carbon Block Flow Rate | 7 GPM @ 8 PSID |
| Sediment Flow Rate | 5 GPM nominal |
| Operating Pressure | Up to 90 PSI |
| Temperature Range | 39°F – 125°F (4°C – 52°C) |
| Replacement Interval | Every 2–3 months depending on water quality |
Filter Replacement Steps
- Shut off water supply to the filter housing and relieve system pressure by opening a downstream faucet.
- Use a filter wrench to unscrew the Big Blue housing sump, remove old cartridges, and clean the housing interior and o-ring.
- Install the sediment filter first (stage 1) and the carbon block filter second (stage 2) if using a dual-housing system, or use individually in separate housings.
- Reassemble housings, turn water back on slowly, and check for leaks before returning system to full pressure.
- Flush each new cartridge for 3–5 minutes to remove any carbon fines or manufacturing residue before normal use.
Works With Standard 20" Big Blue Housings
These IPW Industries cartridges fit all standard 20-inch Big Blue, Jumbo, and Full Flow filter housings from iSpring, Pentair/Pentek, Tier1, Aquaboon, Simpure, Geekpure, CFS, Omnifilter, Viqua, APEC, Watts Water, Watts Premier, PurePlus, and AquaCrest. The carbon block replaces Matrikx 32-450-20-Green, iSpring FC25B and F2WGB22B, Pentek CBC-20BB, and Filtrex FXB20CL2. The sediment cartridge replaces Pentek EP-20BB, EPM-20BB, P5-20BB, and Hydronix CB-45-2005 models.
Filter Set Details
| Dimensions | 20" x 4.5" each cartridge |
| Micron Rating | 5 micron (both filters) |
| Carbon Block Capacity | Up to 20,000 gallons |
| Carbon Block Flow Rate | 7 GPM @ 8 PSID |
| Sediment Flow Rate | 5 GPM nominal |
| Operating Pressure | Up to 90 PSI |
| Temperature Range | 39°F – 125°F (4°C – 52°C) |
| Replacement Interval | Every 2–3 months depending on water quality |
Filter Replacement Steps
- Shut off water supply to the filter housing and relieve system pressure by opening a downstream faucet.
- Use a filter wrench to unscrew the Big Blue housing sump, remove old cartridges, and clean the housing interior and o-ring.
- Install the sediment filter first (stage 1) and the carbon block filter second (stage 2) if using a dual-housing system, or use individually in separate housings.
- Reassemble housings, turn water back on slowly, and check for leaks before returning system to full pressure.
- Flush each new cartridge for 3–5 minutes to remove any carbon fines or manufacturing residue before normal use.
Works With Standard 20" Big Blue Housings
These IPW Industries cartridges fit all standard 20-inch Big Blue, Jumbo, and Full Flow filter housings from iSpring, Pentair/Pentek, Tier1, Aquaboon, Simpure, Geekpure, CFS, Omnifilter, Viqua, APEC, Watts Water, Watts Premier, PurePlus, and AquaCrest. The carbon block replaces Matrikx 32-450-20-Green, iSpring FC25B and F2WGB22B, Pentek CBC-20BB, and Filtrex FXB20CL2. The sediment cartridge replaces Pentek EP-20BB, EPM-20BB, P5-20BB, and Hydronix CB-45-2005 models.
Original: $52.56
-65%$52.56
$18.40Description
Filter Set Details
| Dimensions | 20" x 4.5" each cartridge |
| Micron Rating | 5 micron (both filters) |
| Carbon Block Capacity | Up to 20,000 gallons |
| Carbon Block Flow Rate | 7 GPM @ 8 PSID |
| Sediment Flow Rate | 5 GPM nominal |
| Operating Pressure | Up to 90 PSI |
| Temperature Range | 39°F – 125°F (4°C – 52°C) |
| Replacement Interval | Every 2–3 months depending on water quality |
Filter Replacement Steps
- Shut off water supply to the filter housing and relieve system pressure by opening a downstream faucet.
- Use a filter wrench to unscrew the Big Blue housing sump, remove old cartridges, and clean the housing interior and o-ring.
- Install the sediment filter first (stage 1) and the carbon block filter second (stage 2) if using a dual-housing system, or use individually in separate housings.
- Reassemble housings, turn water back on slowly, and check for leaks before returning system to full pressure.
- Flush each new cartridge for 3–5 minutes to remove any carbon fines or manufacturing residue before normal use.
Works With Standard 20" Big Blue Housings
These IPW Industries cartridges fit all standard 20-inch Big Blue, Jumbo, and Full Flow filter housings from iSpring, Pentair/Pentek, Tier1, Aquaboon, Simpure, Geekpure, CFS, Omnifilter, Viqua, APEC, Watts Water, Watts Premier, PurePlus, and AquaCrest. The carbon block replaces Matrikx 32-450-20-Green, iSpring FC25B and F2WGB22B, Pentek CBC-20BB, and Filtrex FXB20CL2. The sediment cartridge replaces Pentek EP-20BB, EPM-20BB, P5-20BB, and Hydronix CB-45-2005 models.



















