HomeStore

Myron L (756II-114) 0-100 PPM Analog Monitor Only

Product image 1

Myron L (756II-114) 0-100 PPM Analog Monitor Only

The Myron L 756II-114 Analog Monitor delivers drift-free conductivity measurement from 0-100 PPM with automatic DC offset compensation and precise temperature correction to 25°C. This IP64/NEMA 3 rated controller features field-proven electronics in a compact 6x4.8 inch splash-proof enclosure designed for panel, bench, or surface mounting.
SPECIFICATIONS

Myron L 756II-114 Technical Details

Model Number Myron L 756II-114
Measurement Range 0-100 PPM
Temperature Compensation Automatic to 25°C
Enclosure Rating IP64/NEMA 3 splash and corrosion-proof
Dimensions 6 x 4.8 inches (15.2 x 12.2 cm)
Output Relay 10 amp (increasing or decreasing operation)
Status Indicators Green/red LEDs for above/below set point
Mounting Options Panel, bench, or surface mount
INSTALLATION & USE

Setup and Operation

  1. Mount the 756II-114 monitor in your chosen location using panel, bench, or surface mounting hardware appropriate for the 6x4.8 inch footprint.
  2. Connect the sensor input and configure the internal alarm set point using the push-to-test button for verification before securing the enclosure.
  3. Wire the 10 amp output relay to your control system, selecting either increasing or decreasing reading operation based on your process requirements.
  4. Install optional accessories including the 3-sensor input, 3-range switch, or remote alarm (RA) if required for your monitoring application.
  5. Verify green/red LED indicators respond correctly to water quality changes and confirm automatic temperature compensation is functioning at 25°C reference.
COMPATIBILITY

Applications and System Integration

The Myron L 756II-114 monitor is designed for low-range conductivity applications requiring 0-100 PPM measurement, including reverse osmosis permeate monitoring, deionized water systems, and laboratory water quality control. The monitor-only configuration requires a separate Myron L conductivity sensor (sold separately) and is compatible with the manufacturer's 3-sensor input and 3-range switch accessories for expanded functionality. The heavy-duty 10 amp relay output integrates with automated control systems, solenoid valves, and process alarms. Uncompensated models are available separately for USP 25 compliance applications.

🔧 Pro tip: Use the internal alarm set feature to prevent unauthorized adjustments in commercial installations. The push-to-test button allows technicians to verify set points without breaking the security seal, maintaining calibration integrity between scheduled maintenance intervals.
The Myron L 756II-114 Analog Monitor delivers drift-free conductivity measurement from 0-100 PPM with automatic DC offset compensation and precise temperature correction to 25°C. This IP64/NEMA 3 rated controller features field-proven electronics in a compact 6x4.8 inch splash-proof enclosure designed for panel, bench, or surface mounting.
SPECIFICATIONS

Myron L 756II-114 Technical Details

Model Number Myron L 756II-114
Measurement Range 0-100 PPM
Temperature Compensation Automatic to 25°C
Enclosure Rating IP64/NEMA 3 splash and corrosion-proof
Dimensions 6 x 4.8 inches (15.2 x 12.2 cm)
Output Relay 10 amp (increasing or decreasing operation)
Status Indicators Green/red LEDs for above/below set point
Mounting Options Panel, bench, or surface mount
INSTALLATION & USE

Setup and Operation

  1. Mount the 756II-114 monitor in your chosen location using panel, bench, or surface mounting hardware appropriate for the 6x4.8 inch footprint.
  2. Connect the sensor input and configure the internal alarm set point using the push-to-test button for verification before securing the enclosure.
  3. Wire the 10 amp output relay to your control system, selecting either increasing or decreasing reading operation based on your process requirements.
  4. Install optional accessories including the 3-sensor input, 3-range switch, or remote alarm (RA) if required for your monitoring application.
  5. Verify green/red LED indicators respond correctly to water quality changes and confirm automatic temperature compensation is functioning at 25°C reference.
COMPATIBILITY

Applications and System Integration

The Myron L 756II-114 monitor is designed for low-range conductivity applications requiring 0-100 PPM measurement, including reverse osmosis permeate monitoring, deionized water systems, and laboratory water quality control. The monitor-only configuration requires a separate Myron L conductivity sensor (sold separately) and is compatible with the manufacturer's 3-sensor input and 3-range switch accessories for expanded functionality. The heavy-duty 10 amp relay output integrates with automated control systems, solenoid valves, and process alarms. Uncompensated models are available separately for USP 25 compliance applications.

🔧 Pro tip: Use the internal alarm set feature to prevent unauthorized adjustments in commercial installations. The push-to-test button allows technicians to verify set points without breaking the security seal, maintaining calibration integrity between scheduled maintenance intervals.
$615.71
Myron L (756II-114) 0-100 PPM Analog Monitor Only—
$615.71

Description

The Myron L 756II-114 Analog Monitor delivers drift-free conductivity measurement from 0-100 PPM with automatic DC offset compensation and precise temperature correction to 25°C. This IP64/NEMA 3 rated controller features field-proven electronics in a compact 6x4.8 inch splash-proof enclosure designed for panel, bench, or surface mounting.
SPECIFICATIONS

Myron L 756II-114 Technical Details

Model Number Myron L 756II-114
Measurement Range 0-100 PPM
Temperature Compensation Automatic to 25°C
Enclosure Rating IP64/NEMA 3 splash and corrosion-proof
Dimensions 6 x 4.8 inches (15.2 x 12.2 cm)
Output Relay 10 amp (increasing or decreasing operation)
Status Indicators Green/red LEDs for above/below set point
Mounting Options Panel, bench, or surface mount
INSTALLATION & USE

Setup and Operation

  1. Mount the 756II-114 monitor in your chosen location using panel, bench, or surface mounting hardware appropriate for the 6x4.8 inch footprint.
  2. Connect the sensor input and configure the internal alarm set point using the push-to-test button for verification before securing the enclosure.
  3. Wire the 10 amp output relay to your control system, selecting either increasing or decreasing reading operation based on your process requirements.
  4. Install optional accessories including the 3-sensor input, 3-range switch, or remote alarm (RA) if required for your monitoring application.
  5. Verify green/red LED indicators respond correctly to water quality changes and confirm automatic temperature compensation is functioning at 25°C reference.
COMPATIBILITY

Applications and System Integration

The Myron L 756II-114 monitor is designed for low-range conductivity applications requiring 0-100 PPM measurement, including reverse osmosis permeate monitoring, deionized water systems, and laboratory water quality control. The monitor-only configuration requires a separate Myron L conductivity sensor (sold separately) and is compatible with the manufacturer's 3-sensor input and 3-range switch accessories for expanded functionality. The heavy-duty 10 amp relay output integrates with automated control systems, solenoid valves, and process alarms. Uncompensated models are available separately for USP 25 compliance applications.

🔧 Pro tip: Use the internal alarm set feature to prevent unauthorized adjustments in commercial installations. The push-to-test button allows technicians to verify set points without breaking the security seal, maintaining calibration integrity between scheduled maintenance intervals.
Myron L (756II-114) 0-100 PPM Analog Monitor Only | Isopure Water