Myron L (757II-116) 0-200 PPM Analog Monitor-Control
757II-116 Analog Conductivity Monitor-Control (0-200 PPM)
The Myron L 757II-116 delivers drift-free conductivity monitoring from 0-200 PPM with integrated relay control for automated water quality management. Built for demanding commercial and industrial environments, this monitor-controller combines field-proven electronics with precise temperature compensation circuitry that adapts as water conditions change.
Precision Monitoring with Automated Control
Continuous Conductivity Measurement
Sensor input continuously measures electrical conductivity from 0-200 PPM with automatic DC offset compensation to eliminate drift and ensure accurate readings over time.
Dynamic Temperature Correction
Refined TC circuit automatically adjusts for temperature coefficient changes in water, correcting all readings to 25°C standard for consistent accuracy across varying conditions.
Analog Readout with LED Indicators
Clear analog display shows real-time conductivity with green and red LEDs indicating whether readings are above or below your set control point. Push-to-test button allows quick set point verification.
Heavy-Duty Relay Output
10 amp relay triggers on increasing or decreasing readings to activate solenoid valves, pumps, or alarms. Internal alarm set prevents unauthorized adjustments to your control parameters.
Technical Details
| Model Number | Myron L 757II-116 |
| Measurement Range | 0-200 PPM (Conductivity) |
| Temperature Compensation | Automatic to 25°C |
| Relay Rating | 10 Amp Output (SPDT) |
| Enclosure Rating | IP64 / NEMA 3 (Splash & Corrosion Proof) |
| Dimensions | 6 x 4.8 inches (152 x 122 mm) |
| Mounting Options | Panel, Bench, or Surface |
| Control Mode | Increasing or Decreasing Setpoint |
Applications and Add-Ons
The 757II-116 works with reverse osmosis permeate monitoring, deionized water quality control, boiler feedwater systems, and any application requiring continuous low-range conductivity measurement. Optional accessories include the 3 Sensor input for multiple measurement points, 3 Range switch for field range adjustment, and RA Remote Alarm module for off-site monitoring. Uncompensated models are available separately for USP 25 compliance in pharmaceutical applications. Compatible with most conductivity cell sensors rated for 0-200 PPM range.
757II-116 Analog Conductivity Monitor-Control (0-200 PPM)
The Myron L 757II-116 delivers drift-free conductivity monitoring from 0-200 PPM with integrated relay control for automated water quality management. Built for demanding commercial and industrial environments, this monitor-controller combines field-proven electronics with precise temperature compensation circuitry that adapts as water conditions change.
Precision Monitoring with Automated Control
Continuous Conductivity Measurement
Sensor input continuously measures electrical conductivity from 0-200 PPM with automatic DC offset compensation to eliminate drift and ensure accurate readings over time.
Dynamic Temperature Correction
Refined TC circuit automatically adjusts for temperature coefficient changes in water, correcting all readings to 25°C standard for consistent accuracy across varying conditions.
Analog Readout with LED Indicators
Clear analog display shows real-time conductivity with green and red LEDs indicating whether readings are above or below your set control point. Push-to-test button allows quick set point verification.
Heavy-Duty Relay Output
10 amp relay triggers on increasing or decreasing readings to activate solenoid valves, pumps, or alarms. Internal alarm set prevents unauthorized adjustments to your control parameters.
Technical Details
| Model Number | Myron L 757II-116 |
| Measurement Range | 0-200 PPM (Conductivity) |
| Temperature Compensation | Automatic to 25°C |
| Relay Rating | 10 Amp Output (SPDT) |
| Enclosure Rating | IP64 / NEMA 3 (Splash & Corrosion Proof) |
| Dimensions | 6 x 4.8 inches (152 x 122 mm) |
| Mounting Options | Panel, Bench, or Surface |
| Control Mode | Increasing or Decreasing Setpoint |
Applications and Add-Ons
The 757II-116 works with reverse osmosis permeate monitoring, deionized water quality control, boiler feedwater systems, and any application requiring continuous low-range conductivity measurement. Optional accessories include the 3 Sensor input for multiple measurement points, 3 Range switch for field range adjustment, and RA Remote Alarm module for off-site monitoring. Uncompensated models are available separately for USP 25 compliance in pharmaceutical applications. Compatible with most conductivity cell sensors rated for 0-200 PPM range.
Description
757II-116 Analog Conductivity Monitor-Control (0-200 PPM)
The Myron L 757II-116 delivers drift-free conductivity monitoring from 0-200 PPM with integrated relay control for automated water quality management. Built for demanding commercial and industrial environments, this monitor-controller combines field-proven electronics with precise temperature compensation circuitry that adapts as water conditions change.
Precision Monitoring with Automated Control
Continuous Conductivity Measurement
Sensor input continuously measures electrical conductivity from 0-200 PPM with automatic DC offset compensation to eliminate drift and ensure accurate readings over time.
Dynamic Temperature Correction
Refined TC circuit automatically adjusts for temperature coefficient changes in water, correcting all readings to 25°C standard for consistent accuracy across varying conditions.
Analog Readout with LED Indicators
Clear analog display shows real-time conductivity with green and red LEDs indicating whether readings are above or below your set control point. Push-to-test button allows quick set point verification.
Heavy-Duty Relay Output
10 amp relay triggers on increasing or decreasing readings to activate solenoid valves, pumps, or alarms. Internal alarm set prevents unauthorized adjustments to your control parameters.
Technical Details
| Model Number | Myron L 757II-116 |
| Measurement Range | 0-200 PPM (Conductivity) |
| Temperature Compensation | Automatic to 25°C |
| Relay Rating | 10 Amp Output (SPDT) |
| Enclosure Rating | IP64 / NEMA 3 (Splash & Corrosion Proof) |
| Dimensions | 6 x 4.8 inches (152 x 122 mm) |
| Mounting Options | Panel, Bench, or Surface |
| Control Mode | Increasing or Decreasing Setpoint |
Applications and Add-Ons
The 757II-116 works with reverse osmosis permeate monitoring, deionized water quality control, boiler feedwater systems, and any application requiring continuous low-range conductivity measurement. Optional accessories include the 3 Sensor input for multiple measurement points, 3 Range switch for field range adjustment, and RA Remote Alarm module for off-site monitoring. Uncompensated models are available separately for USP 25 compliance in pharmaceutical applications. Compatible with most conductivity cell sensors rated for 0-200 PPM range.
