HomeStore

Omnipure - E5715-P - 14" x 2.5" E-Series 1 Micron Carbon Block, Phosphate Filter - Scale Inhibitor; Lead & Cyst Reduction

Product image 1
1 / 3

Omnipure - E5715-P - 14" x 2.5" E-Series 1 Micron Carbon Block, Phosphate Filter - Scale Inhibitor; Lead & Cyst Reduction

The Omnipure E5715-P combines 1-micron carbon block filtration with phosphate scale inhibition in a single 14" x 2.5" cartridge designed for lead and cyst reduction. Its universal cap design fits all permanent existing heads, making filter changes straightforward and tool-free.
SPECIFICATIONS

E5715-P Technical Details

Model Number Omnipure E5715-P
Dimensions 14" L x 2.5" W
Micron Rating 1 Micron
Flow Rate 0.5 GPM
Filtration Media Carbon Block with Polyphosphate
Service Life 2000 Gallons
Max Pressure / Temp 125 PSI / 100°F
Reduces Chlorine, Lead, Cysts, Scale, Taste, Odor
INSTALLATION & USE

Filter Replacement Process

  1. Turn off water supply and relieve system pressure by opening the faucet downstream of the filter
  2. Rotate the existing filter counterclockwise to remove from the permanent head
  3. Align the new E5715-P filter with the head and rotate clockwise until hand-tight
  4. Turn on water supply slowly and check for leaks before returning system to normal operation
  5. Flush the new filter for 3-5 minutes before use to remove any carbon fines
COMPATIBILITY

System Requirements

The E5715-P is compatible with all Omnipure E-Series permanent filter heads and most standard 14" inline housing systems that accept 2.5" diameter cartridges. The universal cap design ensures compatibility across filter head generations, eliminating the need to verify head type before ordering. This filter is particularly suited for point-of-use applications where lead reduction, cyst removal, and scale prevention are priorities, including under-sink systems, ice makers, and beverage equipment.

🔧 Pro Tip: Replace the E5715-P every 6 months or at 2000 gallons, whichever comes first, to maintain lead reduction and scale inhibitor performance. Hard water areas may require more frequent changes as the polyphosphate depletes faster under high mineral loads.
The Omnipure E5715-P combines 1-micron carbon block filtration with phosphate scale inhibition in a single 14" x 2.5" cartridge designed for lead and cyst reduction. Its universal cap design fits all permanent existing heads, making filter changes straightforward and tool-free.
SPECIFICATIONS

E5715-P Technical Details

Model Number Omnipure E5715-P
Dimensions 14" L x 2.5" W
Micron Rating 1 Micron
Flow Rate 0.5 GPM
Filtration Media Carbon Block with Polyphosphate
Service Life 2000 Gallons
Max Pressure / Temp 125 PSI / 100°F
Reduces Chlorine, Lead, Cysts, Scale, Taste, Odor
INSTALLATION & USE

Filter Replacement Process

  1. Turn off water supply and relieve system pressure by opening the faucet downstream of the filter
  2. Rotate the existing filter counterclockwise to remove from the permanent head
  3. Align the new E5715-P filter with the head and rotate clockwise until hand-tight
  4. Turn on water supply slowly and check for leaks before returning system to normal operation
  5. Flush the new filter for 3-5 minutes before use to remove any carbon fines
COMPATIBILITY

System Requirements

The E5715-P is compatible with all Omnipure E-Series permanent filter heads and most standard 14" inline housing systems that accept 2.5" diameter cartridges. The universal cap design ensures compatibility across filter head generations, eliminating the need to verify head type before ordering. This filter is particularly suited for point-of-use applications where lead reduction, cyst removal, and scale prevention are priorities, including under-sink systems, ice makers, and beverage equipment.

🔧 Pro Tip: Replace the E5715-P every 6 months or at 2000 gallons, whichever comes first, to maintain lead reduction and scale inhibitor performance. Hard water areas may require more frequent changes as the polyphosphate depletes faster under high mineral loads.
Select Choose
From $25.04

Original: $71.54

-65%
Omnipure - E5715-P - 14" x 2.5" E-Series 1 Micron Carbon Block, Phosphate Filter - Scale Inhibitor; Lead & Cyst Reduction—

$71.54

$25.04

Description

The Omnipure E5715-P combines 1-micron carbon block filtration with phosphate scale inhibition in a single 14" x 2.5" cartridge designed for lead and cyst reduction. Its universal cap design fits all permanent existing heads, making filter changes straightforward and tool-free.
SPECIFICATIONS

E5715-P Technical Details

Model Number Omnipure E5715-P
Dimensions 14" L x 2.5" W
Micron Rating 1 Micron
Flow Rate 0.5 GPM
Filtration Media Carbon Block with Polyphosphate
Service Life 2000 Gallons
Max Pressure / Temp 125 PSI / 100°F
Reduces Chlorine, Lead, Cysts, Scale, Taste, Odor
INSTALLATION & USE

Filter Replacement Process

  1. Turn off water supply and relieve system pressure by opening the faucet downstream of the filter
  2. Rotate the existing filter counterclockwise to remove from the permanent head
  3. Align the new E5715-P filter with the head and rotate clockwise until hand-tight
  4. Turn on water supply slowly and check for leaks before returning system to normal operation
  5. Flush the new filter for 3-5 minutes before use to remove any carbon fines
COMPATIBILITY

System Requirements

The E5715-P is compatible with all Omnipure E-Series permanent filter heads and most standard 14" inline housing systems that accept 2.5" diameter cartridges. The universal cap design ensures compatibility across filter head generations, eliminating the need to verify head type before ordering. This filter is particularly suited for point-of-use applications where lead reduction, cyst removal, and scale prevention are priorities, including under-sink systems, ice makers, and beverage equipment.

🔧 Pro Tip: Replace the E5715-P every 6 months or at 2000 gallons, whichever comes first, to maintain lead reduction and scale inhibitor performance. Hard water areas may require more frequent changes as the polyphosphate depletes faster under high mineral loads.
Omnipure - E5715-P - 14" x 2.5" E-Series 1 Micron Carbon Block, Phosphate Filter - Scale Inhibitor; Lead & Cyst Reduction | Isopure Water