HomeStore

Omnipure - ELF 1M-P - 12.5" x 4" ELF-Series 1 Micron Carbon Block & Phosphate Filter; Scale Inhibitor

Product image 1
1 / 3

Omnipure - ELF 1M-P - 12.5" x 4" ELF-Series 1 Micron Carbon Block & Phosphate Filter; Scale Inhibitor

The Omnipure ELF 1M-P combines 1 micron carbon block filtration with phosphate scale inhibition in a compact 12.5" x 4" inline cartridge. Designed for both taste improvement and equipment protection, this dual-function filter removes chlorine, cysts, taste, and odor while preventing scale buildup in water-using appliances.
SPECIFICATIONS

ELF 1M-P Technical Details

Manufacturer Omnipure Filter Company
Model Number ELF 1M-P
Dimensions 12.5" length x 4" diameter
Filtration Type Carbon block with phosphate scale inhibitor
Micron Rating 1 micron nominal
Series ELF-Series (E-Series inline format)
Primary Applications Chlorine, taste, odor, cyst reduction; scale prevention
Connection Type Inline quick-connect (proprietary ELF housing)
INSTALLATION & USE

Cartridge Replacement Process

  1. Shut off water supply and relieve system pressure by opening a downstream faucet or using the pressure release button if equipped.
  2. Remove the ELF housing according to manufacturer instructions, then extract the old filter cartridge and dispose of it properly.
  3. Insert the new Omnipure ELF 1M-P cartridge into the housing, ensuring proper orientation and seating, then reassemble the housing.
  4. Turn water supply back on slowly and check for leaks at all connection points before putting the system into regular service.
  5. Flush the new carbon block filter for 3-5 minutes to remove carbon fines and activate the phosphate media before use.
COMPATIBILITY

System Fit & Applications

The Omnipure ELF 1M-P is designed specifically for ELF-Series inline filter housings that accept 12.5" x 4" diameter cartridges with proprietary end caps. This dual-function filter works well in reverse osmosis pre-filtration stages, ice maker lines, beverage equipment, and other applications where both sediment/chemical reduction and scale prevention are needed. The phosphate treatment is particularly valuable in hard water areas or where protecting downstream equipment from mineral buildup is a priority. Verify housing compatibility before ordering, as the ELF series uses a unique format that is not interchangeable with standard 10" or other inline cartridge styles.

🔧 Pro tip: The phosphate scale inhibitor works by sequestering minerals rather than removing them, so you'll still see TDS remain unchanged. This is normal and expected—the phosphate prevents minerals from depositing on surfaces, extending the life of heating elements, valve seats, and RO membranes without the need for a water softener.
The Omnipure ELF 1M-P combines 1 micron carbon block filtration with phosphate scale inhibition in a compact 12.5" x 4" inline cartridge. Designed for both taste improvement and equipment protection, this dual-function filter removes chlorine, cysts, taste, and odor while preventing scale buildup in water-using appliances.
SPECIFICATIONS

ELF 1M-P Technical Details

Manufacturer Omnipure Filter Company
Model Number ELF 1M-P
Dimensions 12.5" length x 4" diameter
Filtration Type Carbon block with phosphate scale inhibitor
Micron Rating 1 micron nominal
Series ELF-Series (E-Series inline format)
Primary Applications Chlorine, taste, odor, cyst reduction; scale prevention
Connection Type Inline quick-connect (proprietary ELF housing)
INSTALLATION & USE

Cartridge Replacement Process

  1. Shut off water supply and relieve system pressure by opening a downstream faucet or using the pressure release button if equipped.
  2. Remove the ELF housing according to manufacturer instructions, then extract the old filter cartridge and dispose of it properly.
  3. Insert the new Omnipure ELF 1M-P cartridge into the housing, ensuring proper orientation and seating, then reassemble the housing.
  4. Turn water supply back on slowly and check for leaks at all connection points before putting the system into regular service.
  5. Flush the new carbon block filter for 3-5 minutes to remove carbon fines and activate the phosphate media before use.
COMPATIBILITY

System Fit & Applications

The Omnipure ELF 1M-P is designed specifically for ELF-Series inline filter housings that accept 12.5" x 4" diameter cartridges with proprietary end caps. This dual-function filter works well in reverse osmosis pre-filtration stages, ice maker lines, beverage equipment, and other applications where both sediment/chemical reduction and scale prevention are needed. The phosphate treatment is particularly valuable in hard water areas or where protecting downstream equipment from mineral buildup is a priority. Verify housing compatibility before ordering, as the ELF series uses a unique format that is not interchangeable with standard 10" or other inline cartridge styles.

🔧 Pro tip: The phosphate scale inhibitor works by sequestering minerals rather than removing them, so you'll still see TDS remain unchanged. This is normal and expected—the phosphate prevents minerals from depositing on surfaces, extending the life of heating elements, valve seats, and RO membranes without the need for a water softener.
Select Choose
From $45.47
Omnipure - ELF 1M-P - 12.5" x 4" ELF-Series 1 Micron Carbon Block & Phosphate Filter; Scale Inhibitor—
$45.47

Description

The Omnipure ELF 1M-P combines 1 micron carbon block filtration with phosphate scale inhibition in a compact 12.5" x 4" inline cartridge. Designed for both taste improvement and equipment protection, this dual-function filter removes chlorine, cysts, taste, and odor while preventing scale buildup in water-using appliances.
SPECIFICATIONS

ELF 1M-P Technical Details

Manufacturer Omnipure Filter Company
Model Number ELF 1M-P
Dimensions 12.5" length x 4" diameter
Filtration Type Carbon block with phosphate scale inhibitor
Micron Rating 1 micron nominal
Series ELF-Series (E-Series inline format)
Primary Applications Chlorine, taste, odor, cyst reduction; scale prevention
Connection Type Inline quick-connect (proprietary ELF housing)
INSTALLATION & USE

Cartridge Replacement Process

  1. Shut off water supply and relieve system pressure by opening a downstream faucet or using the pressure release button if equipped.
  2. Remove the ELF housing according to manufacturer instructions, then extract the old filter cartridge and dispose of it properly.
  3. Insert the new Omnipure ELF 1M-P cartridge into the housing, ensuring proper orientation and seating, then reassemble the housing.
  4. Turn water supply back on slowly and check for leaks at all connection points before putting the system into regular service.
  5. Flush the new carbon block filter for 3-5 minutes to remove carbon fines and activate the phosphate media before use.
COMPATIBILITY

System Fit & Applications

The Omnipure ELF 1M-P is designed specifically for ELF-Series inline filter housings that accept 12.5" x 4" diameter cartridges with proprietary end caps. This dual-function filter works well in reverse osmosis pre-filtration stages, ice maker lines, beverage equipment, and other applications where both sediment/chemical reduction and scale prevention are needed. The phosphate treatment is particularly valuable in hard water areas or where protecting downstream equipment from mineral buildup is a priority. Verify housing compatibility before ordering, as the ELF series uses a unique format that is not interchangeable with standard 10" or other inline cartridge styles.

🔧 Pro tip: The phosphate scale inhibitor works by sequestering minerals rather than removing them, so you'll still see TDS remain unchanged. This is normal and expected—the phosphate prevents minerals from depositing on surfaces, extending the life of heating elements, valve seats, and RO membranes without the need for a water softener.
Omnipure - ELF 1M-P - 12.5" x 4" ELF-Series 1 Micron Carbon Block & Phosphate Filter; Scale Inhibitor | Isopure Water