HomeStore

Omnipure - ELF XL-1/2-C249-1/2GAC - 15" x 4" ELF XL-Series 50% C-249 Softening Resin & 50% GAC Carbon Filter;

Product image 1

Omnipure - ELF XL-1/2-C249-1/2GAC - 15" x 4" ELF XL-Series 50% C-249 Softening Resin & 50% GAC Carbon Filter;

The Omnipure ELF XL-1/2-C249-1/2GAC combines 50% C-249 softening resin with 50% GAC carbon in a single 15" x 4" cartridge, designed to tackle both hardness minerals and chlorine without requiring two separate filters. This dual-media design delivers comprehensive water conditioning in applications where space and efficiency matter.
SPECIFICATIONS

Omnipure ELF XL-1/2-C249-1/2GAC Technical Details

Model Number ELF XL-1/2-C249-1/2GAC
Dimensions 15 inches x 4 inches diameter
Filtration Media 50% C-249 Softening Resin, 50% GAC Carbon
Micron Rating 10 micron
Maximum Pressure 125 PSI
Maximum Temperature 100°F
Primary Applications Hard water conditioning, chlorine removal, taste and odor improvement
Series Omnipure E-Series ELF XL
INSTALLATION & USE

Installing the ELF XL-1/2-C249-1/2GAC Filter

  1. Shut off water supply and relieve system pressure before removing the old cartridge from your compatible ELF XL housing.
  2. Insert the new ELF XL-1/2-C249-1/2GAC cartridge into the housing, ensuring proper seating and O-ring alignment to prevent leaks.
  3. Restore water pressure slowly and flush the cartridge for 5 minutes to remove carbon fines and activate the resin bed.
  4. Check all connections for leaks and monitor initial flow rate, which may be slightly reduced as the mixed media settles.
COMPATIBILITY

System Requirements

The Omnipure ELF XL-1/2-C249-1/2GAC is designed specifically for Omnipure ELF XL-series housings that accommodate 15" x 4" diameter cartridges. This proprietary filter format is not interchangeable with standard 10-inch or slim-line housings. Ideal for inline RO systems, commercial water treatment setups, or any application requiring simultaneous hardness reduction and chlorine removal. Replacement interval depends on incoming water hardness and chlorine levels, but typical service life ranges from 6 to 12 months in residential applications.

🔧 Pro Tip: If you're dealing with high hardness levels above 10 grains per gallon, the resin portion of this filter will exhaust faster than the carbon. Monitor your water for scale buildup or reduced lathering as early indicators that the softening capacity is depleted, even if chlorine removal remains effective.
The Omnipure ELF XL-1/2-C249-1/2GAC combines 50% C-249 softening resin with 50% GAC carbon in a single 15" x 4" cartridge, designed to tackle both hardness minerals and chlorine without requiring two separate filters. This dual-media design delivers comprehensive water conditioning in applications where space and efficiency matter.
SPECIFICATIONS

Omnipure ELF XL-1/2-C249-1/2GAC Technical Details

Model Number ELF XL-1/2-C249-1/2GAC
Dimensions 15 inches x 4 inches diameter
Filtration Media 50% C-249 Softening Resin, 50% GAC Carbon
Micron Rating 10 micron
Maximum Pressure 125 PSI
Maximum Temperature 100°F
Primary Applications Hard water conditioning, chlorine removal, taste and odor improvement
Series Omnipure E-Series ELF XL
INSTALLATION & USE

Installing the ELF XL-1/2-C249-1/2GAC Filter

  1. Shut off water supply and relieve system pressure before removing the old cartridge from your compatible ELF XL housing.
  2. Insert the new ELF XL-1/2-C249-1/2GAC cartridge into the housing, ensuring proper seating and O-ring alignment to prevent leaks.
  3. Restore water pressure slowly and flush the cartridge for 5 minutes to remove carbon fines and activate the resin bed.
  4. Check all connections for leaks and monitor initial flow rate, which may be slightly reduced as the mixed media settles.
COMPATIBILITY

System Requirements

The Omnipure ELF XL-1/2-C249-1/2GAC is designed specifically for Omnipure ELF XL-series housings that accommodate 15" x 4" diameter cartridges. This proprietary filter format is not interchangeable with standard 10-inch or slim-line housings. Ideal for inline RO systems, commercial water treatment setups, or any application requiring simultaneous hardness reduction and chlorine removal. Replacement interval depends on incoming water hardness and chlorine levels, but typical service life ranges from 6 to 12 months in residential applications.

🔧 Pro Tip: If you're dealing with high hardness levels above 10 grains per gallon, the resin portion of this filter will exhaust faster than the carbon. Monitor your water for scale buildup or reduced lathering as early indicators that the softening capacity is depleted, even if chlorine removal remains effective.
$50.99
Omnipure - ELF XL-1/2-C249-1/2GAC - 15" x 4" ELF XL-Series 50% C-249 Softening Resin & 50% GAC Carbon Filter;—
$50.99

Description

The Omnipure ELF XL-1/2-C249-1/2GAC combines 50% C-249 softening resin with 50% GAC carbon in a single 15" x 4" cartridge, designed to tackle both hardness minerals and chlorine without requiring two separate filters. This dual-media design delivers comprehensive water conditioning in applications where space and efficiency matter.
SPECIFICATIONS

Omnipure ELF XL-1/2-C249-1/2GAC Technical Details

Model Number ELF XL-1/2-C249-1/2GAC
Dimensions 15 inches x 4 inches diameter
Filtration Media 50% C-249 Softening Resin, 50% GAC Carbon
Micron Rating 10 micron
Maximum Pressure 125 PSI
Maximum Temperature 100°F
Primary Applications Hard water conditioning, chlorine removal, taste and odor improvement
Series Omnipure E-Series ELF XL
INSTALLATION & USE

Installing the ELF XL-1/2-C249-1/2GAC Filter

  1. Shut off water supply and relieve system pressure before removing the old cartridge from your compatible ELF XL housing.
  2. Insert the new ELF XL-1/2-C249-1/2GAC cartridge into the housing, ensuring proper seating and O-ring alignment to prevent leaks.
  3. Restore water pressure slowly and flush the cartridge for 5 minutes to remove carbon fines and activate the resin bed.
  4. Check all connections for leaks and monitor initial flow rate, which may be slightly reduced as the mixed media settles.
COMPATIBILITY

System Requirements

The Omnipure ELF XL-1/2-C249-1/2GAC is designed specifically for Omnipure ELF XL-series housings that accommodate 15" x 4" diameter cartridges. This proprietary filter format is not interchangeable with standard 10-inch or slim-line housings. Ideal for inline RO systems, commercial water treatment setups, or any application requiring simultaneous hardness reduction and chlorine removal. Replacement interval depends on incoming water hardness and chlorine levels, but typical service life ranges from 6 to 12 months in residential applications.

🔧 Pro Tip: If you're dealing with high hardness levels above 10 grains per gallon, the resin portion of this filter will exhaust faster than the carbon. Monitor your water for scale buildup or reduced lathering as early indicators that the softening capacity is depleted, even if chlorine removal remains effective.
Omnipure - ELF XL-1/2-C249-1/2GAC - 15" x 4" ELF XL-Series 50% C-249 Softening Resin & 50% GAC Carbon Filter; | Isopure Water