HomeStore

Omnipure - Q5615-P - 12" x 2.5" Q-Series Twist Off Carbon Block Filter - 1 Micron with Phosphate & Lead Removal

Product image 1

Omnipure - Q5615-P - 12" x 2.5" Q-Series Twist Off Carbon Block Filter - 1 Micron with Phosphate & Lead Removal

The Omnipure Q5615-P is a 1 micron carbon block filter that combines lead reduction, phosphate scale inhibition, and cyst removal in a single 12" x 2.5" cartridge designed for Q-Series twist-off heads. Its built-in Twist Tap valve automatically shuts off water flow when you disconnect the filter body, making cartridge changes cleaner and easier in refrigerators, ice makers, beverage equipment, and reverse osmosis systems.
SPECIFICATIONS

Omnipure Q5615-P Technical Details

Dimensions 12" L x 2.5" W
Micron Rating 1 Micron
Filtration Media Carbon Block with Polyphosphate
Flow Rate 0.5 GPM
Service Life 1,500 Gallons
Max Pressure 125 PSIG
Max Temperature 100°F
Reduces Chlorine taste/odor, cysts (Crypto & Giardia), lead, scale
INSTALLATION & USE

Replacing Your Q5615-P Cartridge

  1. Turn off the water supply to your system or allow the Twist Tap valve to automatically shut off when you twist the filter body counterclockwise to disconnect it from the Q-Series head.
  2. Remove the old Q5615-P cartridge and dispose of it properly. Inspect the Q-Series head O-rings for wear or damage.
  3. Align the new Q5615-P filter with the Q-Series head and twist clockwise until it locks securely into place. The Twist Tap valve will open automatically.
  4. Turn the water supply back on and flush the new carbon block filter for 3-5 minutes to remove any carbon fines and activate the polyphosphate media.
  5. Check all connections for leaks and monitor system performance. Replace the cartridge every 1,500 gallons or when you notice a reduction in flow rate or water quality.
COMPATIBILITY

Q-Series System Requirements

The Omnipure Q5615-P is a replacement cartridge that requires an existing Omnipure Q-Series filter head with twist-off capability. Q-Series heads are available with 1/4" quick-connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads. This filter is commonly used in residential reverse osmosis systems, commercial ice makers, refrigerator water lines, beverage dispensers, and under-sink drinking water systems where lead reduction and scale inhibition are priorities. The 1 micron carbon block provides effective cyst removal while the polyphosphate media protects downstream equipment from scale buildup and corrosion.

🔧 The Twist Tap valve in the Q-Series head makes cartridge changes nearly mess-free, but you'll still want to keep a towel handy for any residual water trapped in the filter body. Always flush the new Q5615-P for several minutes before using filtered water for drinking or ice production to clear out carbon fines and activate the phosphate inhibitor.
The Omnipure Q5615-P is a 1 micron carbon block filter that combines lead reduction, phosphate scale inhibition, and cyst removal in a single 12" x 2.5" cartridge designed for Q-Series twist-off heads. Its built-in Twist Tap valve automatically shuts off water flow when you disconnect the filter body, making cartridge changes cleaner and easier in refrigerators, ice makers, beverage equipment, and reverse osmosis systems.
SPECIFICATIONS

Omnipure Q5615-P Technical Details

Dimensions 12" L x 2.5" W
Micron Rating 1 Micron
Filtration Media Carbon Block with Polyphosphate
Flow Rate 0.5 GPM
Service Life 1,500 Gallons
Max Pressure 125 PSIG
Max Temperature 100°F
Reduces Chlorine taste/odor, cysts (Crypto & Giardia), lead, scale
INSTALLATION & USE

Replacing Your Q5615-P Cartridge

  1. Turn off the water supply to your system or allow the Twist Tap valve to automatically shut off when you twist the filter body counterclockwise to disconnect it from the Q-Series head.
  2. Remove the old Q5615-P cartridge and dispose of it properly. Inspect the Q-Series head O-rings for wear or damage.
  3. Align the new Q5615-P filter with the Q-Series head and twist clockwise until it locks securely into place. The Twist Tap valve will open automatically.
  4. Turn the water supply back on and flush the new carbon block filter for 3-5 minutes to remove any carbon fines and activate the polyphosphate media.
  5. Check all connections for leaks and monitor system performance. Replace the cartridge every 1,500 gallons or when you notice a reduction in flow rate or water quality.
COMPATIBILITY

Q-Series System Requirements

The Omnipure Q5615-P is a replacement cartridge that requires an existing Omnipure Q-Series filter head with twist-off capability. Q-Series heads are available with 1/4" quick-connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads. This filter is commonly used in residential reverse osmosis systems, commercial ice makers, refrigerator water lines, beverage dispensers, and under-sink drinking water systems where lead reduction and scale inhibition are priorities. The 1 micron carbon block provides effective cyst removal while the polyphosphate media protects downstream equipment from scale buildup and corrosion.

🔧 The Twist Tap valve in the Q-Series head makes cartridge changes nearly mess-free, but you'll still want to keep a towel handy for any residual water trapped in the filter body. Always flush the new Q5615-P for several minutes before using filtered water for drinking or ice production to clear out carbon fines and activate the phosphate inhibitor.
$13.16

Original: $37.60

-65%
Omnipure - Q5615-P - 12" x 2.5" Q-Series Twist Off Carbon Block Filter - 1 Micron with Phosphate & Lead Removal—

$37.60

$13.16

Description

The Omnipure Q5615-P is a 1 micron carbon block filter that combines lead reduction, phosphate scale inhibition, and cyst removal in a single 12" x 2.5" cartridge designed for Q-Series twist-off heads. Its built-in Twist Tap valve automatically shuts off water flow when you disconnect the filter body, making cartridge changes cleaner and easier in refrigerators, ice makers, beverage equipment, and reverse osmosis systems.
SPECIFICATIONS

Omnipure Q5615-P Technical Details

Dimensions 12" L x 2.5" W
Micron Rating 1 Micron
Filtration Media Carbon Block with Polyphosphate
Flow Rate 0.5 GPM
Service Life 1,500 Gallons
Max Pressure 125 PSIG
Max Temperature 100°F
Reduces Chlorine taste/odor, cysts (Crypto & Giardia), lead, scale
INSTALLATION & USE

Replacing Your Q5615-P Cartridge

  1. Turn off the water supply to your system or allow the Twist Tap valve to automatically shut off when you twist the filter body counterclockwise to disconnect it from the Q-Series head.
  2. Remove the old Q5615-P cartridge and dispose of it properly. Inspect the Q-Series head O-rings for wear or damage.
  3. Align the new Q5615-P filter with the Q-Series head and twist clockwise until it locks securely into place. The Twist Tap valve will open automatically.
  4. Turn the water supply back on and flush the new carbon block filter for 3-5 minutes to remove any carbon fines and activate the polyphosphate media.
  5. Check all connections for leaks and monitor system performance. Replace the cartridge every 1,500 gallons or when you notice a reduction in flow rate or water quality.
COMPATIBILITY

Q-Series System Requirements

The Omnipure Q5615-P is a replacement cartridge that requires an existing Omnipure Q-Series filter head with twist-off capability. Q-Series heads are available with 1/4" quick-connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads. This filter is commonly used in residential reverse osmosis systems, commercial ice makers, refrigerator water lines, beverage dispensers, and under-sink drinking water systems where lead reduction and scale inhibition are priorities. The 1 micron carbon block provides effective cyst removal while the polyphosphate media protects downstream equipment from scale buildup and corrosion.

🔧 The Twist Tap valve in the Q-Series head makes cartridge changes nearly mess-free, but you'll still want to keep a towel handy for any residual water trapped in the filter body. Always flush the new Q5615-P for several minutes before using filtered water for drinking or ice production to clear out carbon fines and activate the phosphate inhibitor.
Omnipure - Q5615-P - 12" x 2.5" Q-Series Twist Off Carbon Block Filter - 1 Micron with Phosphate & Lead Removal | Isopure Water